tundra coils
#22
Contributing Member
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Localmotion
is it necessary to run the top out spacers? if i dont, i can just use the factory bolts and nuts correct?
matt
matt
#23
Originally Posted by FilthyRich
yes, but the lift won't be as much
thanks again
matt
Last edited by Localmotion; 02-08-2005 at 09:31 PM.
#24
sonoran has them listed and any purchased through his store actually goes directly to me. steve did that as a favor to me because he liked the setup so much. unfortuanately, i am currently out - all sold last week. i should have more in by early march. you can get revtek spacers and extended studs from wheelers for about $60 shipped and they usually show up in a week or so.
#25
Originally Posted by bamachem
sonoran has them listed and any purchased through his store actually goes directly to me. steve did that as a favor to me because he liked the setup so much. unfortuanately, i am currently out - all sold last week. i should have more in by early march. you can get revtek spacers and extended studs from wheelers for about $60 shipped and they usually show up in a week or so.
matt
#27
Contributing Member
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Localmotion
sorry im just making sure i have everything right. i can order the revtek 3/8s top plate with the extended bolts from wheelers? do you happen to have a part number or anything? thanks again
matt
matt
#28
Originally Posted by FilthyRich
I have a set of Andy's TO spacer. I was planning on double stacking mine, but I haven't. Get a set (6) extended studs and I can sell you mine. I won't be installing them soon, so there are all you.
matt
#29
Contributing Member
Join Date: Jun 2004
Location: Richmond, Va
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Localmotion
sweet let me know how much u want for them...and when u want payment
matt
matt
#30
Originally Posted by FilthyRich
i believe i paid 37 w/shiiping and no studs. same deal to you. they are unused. Brand new. P.S. i paid close to 100 bucks to Revtek for 2 TO spacers and 6 studs
matt
#34
Originally Posted by ugadawg95
wow thats fast considering you could drive there in about an hour or so...lol...they DO ROCK. Great guys up there.
#38
Contributing Member
Join Date: Jun 2003
Location: Bethlehem, GA
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Cool, let me know what you think. I put the TRD Coils/N91S with the 891/N86 on last weekend. I am going to get an alignment tomorrow. The ride is sooooo much better! I do have a driveline vibration when I let off of the gas around 55-45 mph. I am hoping the Panhard bracket takes care of it If not I gotta do some detective work. It only happened after the rear gear was installed. I verified this by accident. I put the rear coils/shocks on and had to run to the store. That is when I first noticed it. Hopefully it is something simple...Good luck!
#40
Originally Posted by FilthyRich
i'll let you know about Saturday(later this week). the wifey is getting a couple wisdom teeth out, so I am playing nurse this week