Toyota 4X4 Truck Photo request

40_Below · 03-10-2005, 05:06 PM

I need a pic of a 89-94 Truck or 4 runner without the front bumper.

My truck was wrecked by the PO and from what I can tell he cut off the stock bumper mounts. Any picture of a bare front end is useful. Or if anyone can find a exploded view of the front end. Also how is the lower valance held on? Is there brackets for that too? Does it bolt to the bumper?
Sorry if I sound like a noob. Thanks.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

ttr125mar · 03-10-2005, 05:28 PM

I just put mine on a week ago, but yes the valance is bolted to the bumper. I have my old bumper with the brackets attached to it, it was hit so one bracket is smashed if that pic would help maybe? I also could take a pic with my bumper on but my valence isn't (it would show you the brackets and where they mount).

Thanks,
Mario

40_Below · 03-10-2005, 05:30 PM

That would work man, thanks.

ttr125mar · 03-10-2005, 05:40 PM

Here are these two, the bumper is in my bed covered in snow, I will get it in the morning if these two don't help.

Thanks,
Mario

40_Below · 03-10-2005, 05:54 PM

Thanks man, anyone else have any?
Just how many bumper brackets are there?
Thanks.

trx125 · 03-10-2005, 06:02 PM

2 brackets 4 bolts valance screws to the underside of bumper with screws and plastic tabs. no pics sorry!

ttr125mar · 03-10-2005, 06:03 PM

There are two brackets and 4 bolts connect them, two on the bottom connected to frame and two to connect to the bumper. In the first pic that is the bracket. The second one just shows the little bit of the back of the other connected to the frame,

Thanks,
Mario

40_Below · 03-10-2005, 06:08 PM

Do the pickups have a bumper reinforcement? I was looking at a parts diagram and it showed that it did. Also do you guys know if the bumper brackets from a 92-95 4-Runner will work on my 93 Truck? Thanks!!!

Flamedx4 · 03-10-2005, 11:13 PM

Here's the bumper mounts on the frame. I have a 3" body lift, so ignore the spacer bracket and the blocks. And yep, 89-95 should all be the same.

Flamedx4 · 03-10-2005, 11:15 PM

And here's the valance screwed to the bottom of the bumper. Metal clips and screws, simple as can be.

MorphiasX · 03-11-2005, 12:25 AM

What exactly are you trying to do? Are you buying a new stock bumper, or making a new custom bumper? Or do you have the stock bumper and putting it back on?

If you are buying a new stock bumper, i will be selling mine here pretty soon, but new custom front bumper is almost finished. Right now i only have the top section on, i pulled the valance off about the second day i had the truck, i hate that thing all it does is lower approach angle and look ugly...

Here is a pic (really old school pic from when i first got my truck) of what the bumper and valance look like:

Marc · 03-11-2005, 08:08 AM

Does this help?

40_Below · 03-11-2005, 11:20 AM

Awesome guys thanks for the pics. Look at the pic in my other post about the frame being bent, I'm getting rid of that hideous bumper and putting a stock one back on. Thanks for all the help!!!

03-10-2005, 05:28 PM	#2 (permalink)
ttr125mar Registered User Join Date: Nov 2004 Location: Pittsburgh, PA Posts: 158	I just put mine on a week ago, but yes the valance is bolted to the bumper. I have my old bumper with the brackets attached to it, it was hit so one bracket is smashed if that pic would help maybe? I also could take a pic with my bumper on but my valence isn't (it would show you the brackets and where they mount). Thanks, Mario __________________ Mario 92 Toyota Pickup 22re, 89 SR5 Xtra cab 3.0... "It's not how fast you drive, it's how you drive fast" Last edited by ttr125mar; 03-10-2005 at 05:30 PM.

03-10-2005, 05:30 PM	#3 (permalink)
40_Below Registered User Join Date: Jan 2005 Location: Southern Utah Posts: 37	That would work man, thanks. __________________ www.redsandsoffroad.com ---Southern Utah 4x4

03-10-2005, 05:40 PM	#4 (permalink)
ttr125mar Registered User Join Date: Nov 2004 Location: Pittsburgh, PA Posts: 158	Here are these two, the bumper is in my bed covered in snow, I will get it in the morning if these two don't help. Thanks, Mario Attached Thumbnails __________________ Mario 92 Toyota Pickup 22re, 89 SR5 Xtra cab 3.0... "It's not how fast you drive, it's how you drive fast"

03-10-2005, 05:54 PM	#5 (permalink)
40_Below Registered User Join Date: Jan 2005 Location: Southern Utah Posts: 37	Thanks man, anyone else have any? Just how many bumper brackets are there? Thanks. __________________ www.redsandsoffroad.com ---Southern Utah 4x4

03-10-2005, 06:03 PM	#7 (permalink)
ttr125mar Registered User Join Date: Nov 2004 Location: Pittsburgh, PA Posts: 158	There are two brackets and 4 bolts connect them, two on the bottom connected to frame and two to connect to the bumper. In the first pic that is the bracket. The second one just shows the little bit of the back of the other connected to the frame, Thanks, Mario __________________ Mario 92 Toyota Pickup 22re, 89 SR5 Xtra cab 3.0... "It's not how fast you drive, it's how you drive fast"

03-10-2005, 06:02 PM	#6 (permalink)
trx125 Registered User Join Date: Jan 2005 Location: Youfalla, Al Posts: 357	2 brackets 4 bolts valance screws to the underside of bumper with screws and plastic tabs. no pics sorry!

03-10-2005, 06:08 PM	#8 (permalink)
40_Below Registered User Join Date: Jan 2005 Location: Southern Utah Posts: 37	Do the pickups have a bumper reinforcement? I was looking at a parts diagram and it showed that it did. Also do you guys know if the bumper brackets from a 92-95 4-Runner will work on my 93 Truck? Thanks!!! __________________ www.redsandsoffroad.com ---Southern Utah 4x4 Last edited by 40_Below; 03-10-2005 at 06:10 PM.

03-10-2005, 11:13 PM	#9 (permalink)
Flamedx4 Registered User Join Date: May 2004 Location: 100 miles offshore as much as possible, & Springfield Oregon USA Posts: 3,285	Here's the bumper mounts on the frame. I have a 3" body lift, so ignore the spacer bracket and the blocks. And yep, 89-95 should all be the same. Attached Thumbnails __________________ All my Yotas are gone. Stuff to sell: http://www.yotatech.com/showthread.p...39#post1009839 -Phil

03-10-2005, 11:15 PM	#10 (permalink)
Flamedx4 Registered User Join Date: May 2004 Location: 100 miles offshore as much as possible, & Springfield Oregon USA Posts: 3,285	And here's the valance screwed to the bottom of the bumper. Metal clips and screws, simple as can be. Attached Thumbnails __________________ All my Yotas are gone. Stuff to sell: http://www.yotatech.com/showthread.p...39#post1009839 -Phil

03-11-2005, 12:25 AM	#11 (permalink)
MorphiasX Registered User Join Date: Nov 2004 Location: Rancho Cucamonga, CA Posts: 461	What exactly are you trying to do? Are you buying a new stock bumper, or making a new custom bumper? Or do you have the stock bumper and putting it back on? If you are buying a new stock bumper, i will be selling mine here pretty soon, but new custom front bumper is almost finished. Right now i only have the top section on, i pulled the valance off about the second day i had the truck, i hate that thing all it does is lower approach angle and look ugly... Here is a pic (really old school pic from when i first got my truck) of what the bumper and valance look like: __________________ - Steve Galaxy Gray '90 Toyota Xtracab 3.4 V6-swapped, SAS'd & TRD Locked 4x4 5spd. with a few mods... Speedway Blue '07 Tacoma Doublecab 4x4 V6 TRD-Sport Automatic

03-11-2005, 08:08 AM	#12 (permalink)
Marc Contributing Member Join Date: Sep 2003 Location: Winnipeg, MB, Canada Posts: 685	Does this help? __________________ '91 4Runner SR5 V6 4X4 Auto, A/C, 4.56, 31x10.5x15 Nokian Vatiiva Tires, Taurus fan (removed) '90 4Runner SR5 V6 4X4 Auto, A/C, 4.56 V6 power with V8 fuel mileage I've used Fram oil filters and dino oil in all my stuff for 30 years and never had trouble I bet MOST people who say "swap in a 3.4" have NEVER changed any engine nevermind converting to a different type

03-11-2005, 11:20 AM	#13 (permalink)
40_Below Registered User Join Date: Jan 2005 Location: Southern Utah Posts: 37	Awesome guys thanks for the pics. Look at the pic in my other post about the frame being bent, I'm getting rid of that hideous bumper and putting a stock one back on. Thanks for all the help!!! __________________ www.redsandsoffroad.com ---Southern Utah 4x4

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1983 Toyota 4x4 truck question	Whitey	95.5-2004 Tacomas & 96-2002 4Runners	4	08-26-2009 06:12 PM
1988 toyota truck 3.0 4x4 not starting	toyota 1988	86-95 Trucks & 4Runners	1	05-22-2007 07:55 PM
Photo Request - Black 3rd Gen 4Runners	Scofco	95.5-2004 Tacomas & 96-2002 4Runners	29	02-19-2007 01:11 PM
Should I buy this 1988 Toyota 4x4 Truck	Glockem	86-95 Trucks & 4Runners	35	02-18-2007 05:39 PM