4WD indicator light not working
10-09-2006, 09:17 AM
#1
Registered User
Thread Starter
Join Date: Oct 2006
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
4WD indicator light not working
HI,
4x4 is working when I push the lock, but the indicator (located on the right side, just below the fuel gauge) will not work. Now, I checked fuses, they are ok, I checked sensor (it may be called different but I don’t know proper name for it) which is on gear box connected with two wires, this sensor is ok. Also I checked bulb on dashboard and it is OK. What to do. Should I check something else.
Igor
4x4 is working when I push the lock, but the indicator (located on the right side, just below the fuel gauge) will not work. Now, I checked fuses, they are ok, I checked sensor (it may be called different but I don’t know proper name for it) which is on gear box connected with two wires, this sensor is ok. Also I checked bulb on dashboard and it is OK. What to do. Should I check something else.
Igor
10-09-2006, 09:20 AM
#2
Registered User
Join Date: Jul 2006
Location: Tennessee
Posts: 1,836
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure the 4x4 is working? How did you test it?
I had the same issue. Here is my thread.
https://www.yotatech.com/forums/f2/actuator-4wd-my-4wd-wont-engage-91288/
I had the same issue. Here is my thread.
https://www.yotatech.com/forums/f2/actuator-4wd-my-4wd-wont-engage-91288/
Last edited by cackalak han; 10-09-2006 at 09:22 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Aleeex_u
86-95 Trucks & 4Runners
10
06-05-2016 06:52 PM
