4.3l exhaust swap help
12-23-2015, 09:15 PM
#1
Registered User
Thread Starter
Join Date: Nov 2013
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
4.3l exhaust swap help
i have a 4.3l swap in my 88 4runner. and really wondering how you guys have done your exhaust and what header or manifold you used. mine i used sanderson block hugger headers with one pointing back like normal (driver side) other pointing kinda forward some (passenger side) and i have the driver side running normal passenger side is kinda run under the oil pan and i don't like it and its annoying to get around.
the 2 with the nice clean 4.3l are not my photos but its the same headers i have
the one with the half red pan is mine that's how i had it ran. it is a complete true dual exhaust.
any ideas or photos of your stuff greatly appreciated for the help.
also i do not have a SAS swap unfortunately. so room is kinda tight.
the 2 with the nice clean 4.3l are not my photos but its the same headers i have
the one with the half red pan is mine that's how i had it ran. it is a complete true dual exhaust.
any ideas or photos of your stuff greatly appreciated for the help.
also i do not have a SAS swap unfortunately. so room is kinda tight.
Last edited by 4.34runner88; 12-23-2015 at 09:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Runnin13s
86-95 Trucks & 4Runners
3
11-05-2015 07:45 PM
