FS[PacSouthWest]: Part out 91 4runner 3.0
#23
Registered User
It has some body rust. Most if not all would disappear with a set of flares tho. If you search "1994 SR5 4-runner for sale" it should pop right up. It's been a dd for about 5 years. Turned into a 3rd vehicle about a year ago. It's a really nice, unmolested runner besides that. 31X10.50's almost new. And a aftermarket deck are the only things it has that Toyota didn't put on it. Full tune up and timing change within the last 18 months. Sorry to hijack.
#25
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Tahoe, California
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Blacktail hunter: does the back of your cluster have the bulky, white harness that the speedo cable goes into? Shown in the first picture.. It does pop off, if need be. It matches up with the harness on the speedo cable itself, shown in picture 2. I can include the speedo cable itself for an additional 10, unfortunately the needle is bouncy... Let me know..
Last edited by StewsRunner; 06-06-2013 at 02:02 PM.
#26
Registered User
I dont need the cable, my cable should work by popping that white piece off the cluster.
Interested in the clock too if the guy who asked about it before dont want it.
Interested in the clock too if the guy who asked about it before dont want it.
#34
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Tahoe, California
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Hey Toyota Boy: If you are interested in the center console, I pulled it. Unfortunately, it is the shallow pocket with the rear heater, not sure if you have a use for that in your pick up Any ways, it's clean, blue and has 3 switch slots. Let me know...
If anyone is interested in the rear heater, I do not know how to go about removing it, lots of hoses and wires that go left and right so if you are familiar with them and are interested in purchasing it, let me know.
Two front bucket seats in GREAT condition and rear bench seats in even greater condition, is anyone interested?
I also pulled out the trim that surrounds the gauge cluster, black, clean and has two switch spots.
Glove box, kick panels MINUS the fuse cover, Toyota Boy has dibs.. trim around the automatic shifter, possibly window up/down/lock switches..
HVAC face as well with all 4 knobs..
If anyone is interested in the rear heater, I do not know how to go about removing it, lots of hoses and wires that go left and right so if you are familiar with them and are interested in purchasing it, let me know.
Two front bucket seats in GREAT condition and rear bench seats in even greater condition, is anyone interested?
I also pulled out the trim that surrounds the gauge cluster, black, clean and has two switch spots.
Glove box, kick panels MINUS the fuse cover, Toyota Boy has dibs.. trim around the automatic shifter, possibly window up/down/lock switches..
HVAC face as well with all 4 knobs..
Last edited by StewsRunner; 06-07-2013 at 07:50 AM.
#35
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Tahoe, California
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Toyota Boy: The clock is yours but do you need the wiring behind it, or just the clock itself? And is this the piece you need that surrounds the stereo? Do you need the pocket?
\
Here is the rear bumper, not perfect but good looking. I cut a small piece out of it to fit around my tire carrier as seen in picture 1 and the other side is slightly bent, picture 2.
I also have a factory switch with 6? ports so you can power on all of your lights with one swicth, i'll get a picture later..
\
Here is the rear bumper, not perfect but good looking. I cut a small piece out of it to fit around my tire carrier as seen in picture 1 and the other side is slightly bent, picture 2.
I also have a factory switch with 6? ports so you can power on all of your lights with one swicth, i'll get a picture later..
#36
Registered User
Join Date: Mar 2005
Location: Whittier, CA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for your loss here. What does the dash cover look like? Mines all cracked and I'm looking for a replacement. Shipping would be to 90502. Would love a set of bucket sets to replace my 60/40 bench but too far away.
Thanks,
John
Thanks,
John
#39
Registered User
iTrader: (2)
Umm I have no use for the console. Thanks anyways.