5M-GE bellhousing

HardCharger81 · 09-08-2008, 08:05 PM

I've found an old low mileage I6 to swap into my desert truck.

I have a R151 trans from a 22re turbo.
Will the 5M-GE bolt to that? or do I need a different bellhousing?

Thanks

Toy-SkiTzo · 09-08-2008, 08:25 PM

you need the bellhousing from a 5spd non turbo supra with a w58 motor

annoyingrob · 09-21-2008, 09:24 PM

Or a 7M-GTE bellhousing, and a R154 transmission with the tail housing swapped over from an R150F or R151F.

Or a 7M-GTE bellhousing with a newer R150 with the longer input shaft.

09-08-2008, 08:05 PM	#1 (permalink)
HardCharger81 Registered User Join Date: Jun 2008 Location: Elk Grove CA Posts: 18	5M-GE bellhousing I've found an old low mileage I6 to swap into my desert truck. I have a R151 trans from a 22re turbo. Will the 5M-GE bolt to that? or do I need a different bellhousing? Thanks

09-08-2008, 08:25 PM	#2 (permalink)
Toy-SkiTzo Registered User Join Date: May 2006 Location: MA Posts: 405	you need the bellhousing from a 5spd non turbo supra with a w58 motor __________________ 86 4runner, TG 3in rears, RUF, 36x12.5 TSL/sx on allied beadlocks, 85 toy axle, FROR crossmember ,rear disc brakes, Detroit front,welded rear, 4.10 gears,dual cases, hysteer,30 spline longs, full exo,pickup gate, link to my build

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What starter? 4.3 with AA bellhousing	bcumbie	86-95 Trucks & 4Runners	2	04-29-2008 08:23 AM
22re Bellhousing	RD1970	86-95 Trucks & 4Runners	5	12-14-2007 10:39 AM
Flywheel + bellhousing	gametom	86-95 Trucks & 4Runners	16	11-12-2007 10:24 PM
4.3 to 5spd bellhousing	95RunnerSR5	Items Wanted	0	06-03-2007 09:41 AM
need bellhousing	becks86yota	Engine/Tranny/Parts	0	05-03-2007 08:05 PM

09-21-2008, 09:24 PM	#3 (permalink)
annoyingrob Registered User Join Date: Aug 2008 Location: Calgary, AB Posts: 173	Or a 7M-GTE bellhousing, and a R154 transmission with the tail housing swapped over from an R150F or R151F. Or a 7M-GTE bellhousing with a newer R150 with the longer input shaft.