How to wire a 3rd gen Transfercase??
07-17-2012, 01:51 PM
#1
Registered User
Thread Starter
Join Date: Jul 2011
Location: Reno Nv
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
How to wire a 3rd gen Transfercase??
I bought a tranny-tcase combo off of a guy who told me it was for a 93 v6; figured it would bolt up to my 88 v6, it did. The transfer case is a top shift but with a little extra thing coming off the back. After some research I am labeling it as a tcase off of a 95+ model year. A little more reading showed me that those did not have a regular J pattern,
only
4L
|
N
|
H(or 4H?)
and that they had a switch on the actual shift lever?
and a center diff?
Please help me out, I am confused and although my truck runs, there is no 4wd light on the dash, and there are pins unplugged everywhere on the tcase, and a vacuum intake looking thing... help
Thanks
only
4L
|
N
|
H(or 4H?)
and that they had a switch on the actual shift lever?
and a center diff?
Please help me out, I am confused and although my truck runs, there is no 4wd light on the dash, and there are pins unplugged everywhere on the tcase, and a vacuum intake looking thing... help
Thanks
Last edited by BlindfoldMemphis; 07-17-2012 at 01:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
