will this radiator fit?
#1
Registered User
Thread Starter
will this radiator fit?
I got this aluminum radiator and the bungs are different than my stock one which has a small crack in the top. Stock has one bung in top to the right of the cap and the AM has two on the bottom that face back. Could I just plug one and hook the hose up to the other? Here is a picture of the new radiator. Thanks,
Last edited by waskillywabbit; 05-31-2010 at 06:36 AM.
#3
Registered User
Thread Starter
I'm not talkin about the bolt pattern. I'm talking about my radiator has a tube coming out from the top running right into the intake just before the turbo. What is this tube for?
Can I plug it into the bungs on the bottom of the new radiator. I'm guessing that the radiator I have is for a non turbo auto transmission, and mine is a 5spd turbo and thats why the radiator has a different setup for the bungs but the bolts pattern is right and the in and out are also correct.
Can I plug it into the bungs on the bottom of the new radiator. I'm guessing that the radiator I have is for a non turbo auto transmission, and mine is a 5spd turbo and thats why the radiator has a different setup for the bungs but the bolts pattern is right and the in and out are also correct.
Thread
Thread Starter
Forum
Replies
Last Post
foampile
03+ 4Runner/GX470, & 05+ Tacomas
1
12-18-2022 01:29 PM
JaredL
84-85 Trucks & 4Runners
14
03-28-2016 09:08 PM
Road Bull
86-95 Trucks & 4Runners
23
10-10-2015 04:55 PM
klavender1
86-95 Trucks & 4Runners
7
08-15-2015 01:51 PM