Special Service Campaign for 90-95 4Runners, 89-95 Trucks and 93-98 T100s - Page 4

photomike72 · 10-05-2005, 03:19 PM

Cool. Thanks for the heads up!

Mike

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

snap-on · 10-06-2005, 04:34 PM

I just had mine done today. They listed they "checked the toe" but when i took the truck in yesterday it drove straight, now it pulls to the left. Are they supposed to do an alignment? I cant image they wouldnt...

And they tryed to sell me a $250 idler arm.

mt_goat · 10-07-2005, 07:30 AM

I just saw on another thread about this that dealers may replace the tie rods and adjustment sleaves under the recall in the rust belt areas if they are rusted badly. So you might check on this with your dealer before replacing them.

runethechamp · 10-10-2005, 11:48 AM

I asked at my dealer today as I picked up the Repair manual for my 94 4runner, and it is going in to be fixed tomorrow. Good with some free stuff after my transfer case replacement.

jodaso2 · 10-10-2005, 02:23 PM

they are giving everyone the "you need to replace your idle arm" routine. I got it and a couple of my friends got it. It your vehicle pulls take it back and ask them to realign. they tend to forget and then try to blame it on the idle arm (tip from a former toyota tech). It is how they make a little money from the free recalls.

KevyWevy · 10-10-2005, 07:33 PM

im going to go in on weds to get an apt set up for mine. makes me wonder what they're gonna say about the BJ spacers :p

photomike72 · 10-13-2005, 12:49 PM

Just got mine back and it's good to go. No gouging

seems to drive a little firmer. Nothing said about any problems or needing replacement parts.

Thanks for the heads up guys. I would have never known about this w/o this forum!

runethechamp · 10-13-2005, 12:57 PM

Quote:

Originally Posted by photomike72

Just got mine back and it's good to go. No gouging

seems to drive a little firmer. Nothing said about any problems or needing replacement parts.

Same thing here.

airrikk17 · 10-13-2005, 05:48 PM

anyopne with a superlift 4 inch suspension lift go in yet ? it goingot be real funny if they try and hit me for new parts since i just repalced all of the parts except for the relay rod LOL
new idler arm and all, stupid me though i went and had an alignment done , of course i didnt want to wait for toyota to tel lme the part is 6 months out or anything. im calling tomorrow to get the scoop

mach4 · 10-18-2005, 09:21 PM

Last month, I had the T100 in for service at my local toy shop (not a dealer).
They said my left and right ball joints were "bad", and that the idler arm had play. So I had them lift the truck and the tech showed me the play by simply moving one of the tires back and forth.

So I need some recommendations on how to proceed.
I'll need both ball joints replaced, the idler arm, and the relay rod as part of the recall.

Should I take it in to the shop and get the ball joints/idler arm replaced, and then go into the dealer for the relay rod?
I can't imagine I'll get ahead by letting the dealer do it all!

mt_goat · 10-19-2005, 07:04 AM

Quote:

Originally Posted by airrikk17

anyopne with a superlift 4 inch suspension lift go in yet ? it goingot be real funny if they try and hit me for new parts since i just repalced all of the parts except for the relay rod LOL
new idler arm and all, stupid me though i went and had an alignment done , of course i didnt want to wait for toyota to tel lme the part is 6 months out or anything. im calling tomorrow to get the scoop

Does your Superlift kit use the stock relay rod? Mine replaced it with a Superlift part.

bryanr · 10-19-2005, 08:54 AM

Quote:

Originally Posted by mt_goat

Does your Superlift kit use the stock relay rod? Mine replaced it with a Superlift part.

Mine didn't come with one for some reason. Here's the kit I ordered, it lists all of the parts. I am going to call my dealer tomorrow.

http://www.ultimateautoaccessories.c...duct_Code=K750

Blizzard · 10-19-2005, 09:25 AM

Somebody could call for me? I've never heard of recalls in Spain (Yeah, here Toyota sales trucks and cars, later of paying you don't exist for them...)

My 4Runner is diesel but except for cosmetics and the engine is almost the same.

My VIN # is JT111GND0008004200.

If someone can make me this favour I'll be very please

David

Injohneer · 10-27-2005, 07:39 AM

So has anyone actually gotten one of the Service Campaign letters yet?
I see that several of you have gotten the service done, but did you just ask the dealer to do it or did Toyota contact you first?

admiral · 10-27-2005, 07:56 AM

I am still waiting from Toyota to contact me so they can do the service on my 4Runner. It has been a month. I am starting to loose faith....

Blair · 10-27-2005, 11:00 AM

Quote:

Originally Posted by admiral

I am still waiting from Toyota to contact me so they can do the service on my 4Runner. It has been a month. I am starting to loose faith....

You don't need the letter in hand. Just take it in. They will run the VIN and tell you if your's is in the program.

outdoorfever · 10-27-2005, 12:21 PM

i just made an appointment with the dealer for monday at 7!

I am sure they will say i need a new inner tie rod and idler arm. I think I will just pay for that stuff. But anyways I don't have to wait since the dealer finally has the vin#

photomike72 · 10-27-2005, 01:12 PM

I called the 800 number above as I'm not the original owner and woulndt have gotten a letter.

Toyota Corporate verified by VIN # that I qualified for the recall over the phone, and directed me to the nearest dealer and said I didnt need anything to get it done. In the shop the next day and out the day after that. Easy Cheesy.

Mike

leebee · 10-27-2005, 04:05 PM

Quote:

Originally Posted by Blair

Nor is mine. Our VIN's start with JT4VN, U.S. Modles are JT3VN. Guess we'll have to wait.

LeeBee, is your's on the list?
Also LB, is your avatar taken in front of Sherwood Garden, in Ajax?? If so, I was there today, looking for it

hey blair!

just catching up on some of the posts, i checked the list that 4hummer hosted, my vin isnt on the list. i had the same troubles with tc and the stealer as others have mentioned. i did call tc and gave them my information so i should be getting something soon.

lee

Randomness · 10-27-2005, 04:11 PM

Is this something that's important to get done?

leebee · 10-27-2005, 04:29 PM

considering it is steering related, yes.

lee

freshman · 10-27-2005, 07:40 PM

canada residents, are we included?

Keggo · 10-28-2005, 09:20 AM

Just called, my appt. is on Monday at 7:30am...

CoedNaked · 10-28-2005, 11:45 PM

I'm Canadian. Just had mine done this past Wednesday. Yes we are included.

Blair · 10-29-2005, 02:00 AM

Quote:

Originally Posted by CoedNaked

I'm Canadian. Just had mine done this past Wednesday. Yes we are included.

Was your VIN on the published list?
Or did you call the dealer or Toyota?
Or maybey the Canadian stock is just more sturdy???

10-06-2005, 04:34 PM	#77 (permalink)
snap-on Registered User Join Date: Aug 2005 Location: STL MO Posts: 2,382	I just had mine done today. They listed they "checked the toe" but when i took the truck in yesterday it drove straight, now it pulls to the left. Are they supposed to do an alignment? I cant image they wouldnt... And they tryed to sell me a $250 idler arm. __________________ 94 EX cab, 5speed, V6, locked, ARB bar, NWOR headers 92 4runner, auto, V6, OME suspension, Downey headers

10-07-2005, 07:30 AM	#78 (permalink)
mt_goat Contributing Member Join Date: Nov 2002 Location: Oklahoma State Posts: 8,916	I just saw on another thread about this that dealers may replace the tie rods and adjustment sleaves under the recall in the rust belt areas if they are rusted badly. So you might check on this with your dealer before replacing them. __________________ ~Dale~ 93 4X4 ext-cab, auto, SR5, 3.4 V6, supercharged, 2.1" pulley, URD fuel mods, Aquamist WI, IPT valve body mod, dual cases, 4" superlift front, Alcan springs rear, 33 BFG MT, ARB locked front & rear, 5.29 US Gears, RB 1" Body Lift, 1.5" ball joint spacers, manual hubs, TJM T-17, Warn m8000.

10-10-2005, 07:33 PM	#81 (permalink)
KevyWevy Registered User Join Date: Jun 2003 Location: Kirkland, WA Posts: 1,962	im going to go in on weds to get an apt set up for mine. makes me wonder what they're gonna say about the BJ spacers :p __________________ 1994 White 4Runner 5 Speed SR5 4X4 ~121,000 Miles Land Cruiser Coils ~ 1.5" Ball Joint Spacers ~ Buschwaker Fender Flares ~ Cobra 19 DX II ~ Asin Manual Locking Hubs ~ Alpine MP3 HU ~ 2 10" MTX Subs ~ Pioneer 4" Speakers ~ Husky Floor Liners ~ Indiglow Gauges ~ Clear Corners ~ 15"x8" Rock Crawler Wheels ~ 33x12.5 BFG AT's ~ Diff Breathers ~ Yakima Crossbars ~ Sylvania Silver Stars http://community.webshots.com/user/kevywevy84

10-13-2005, 12:49 PM	#82 (permalink)
photomike72 Registered User Join Date: Jul 2003 Location: Dallas, TX Posts: 219	Just got mine back and it's good to go. No gouging seems to drive a little firmer. Nothing said about any problems or needing replacement parts. Thanks for the heads up guys. I would have never known about this w/o this forum! __________________ 1994 4Runner SR5 V6, 2nd HG, Downey headers and custom crossover, Aisin manual hubs, full OME suspension, Optima Red Top, Carsound hi-flow cat, Magnaflow with 2 1/4" pipe, K&N drop-in, Yakima rack, F/R diff breathers, BF Goodrich A/T's, ARB Bull Bar, "Highway Blaster" horns, more to come......

10-13-2005, 05:48 PM	#84 (permalink)
airrikk17 Contributing Member Join Date: Nov 2002 Location: spokane, wa Posts: 566	anyopne with a superlift 4 inch suspension lift go in yet ? it goingot be real funny if they try and hit me for new parts since i just repalced all of the parts except for the relay rod LOL new idler arm and all, stupid me though i went and had an alignment done , of course i didnt want to wait for toyota to tel lme the part is 6 months out or anything. im calling tomorrow to get the scoop __________________ airrikk17 soon to be toyotaless. thanks for all the memories.

10-10-2005, 11:48 AM	#79 (permalink)
runethechamp Registered User Join Date: Oct 2005 Location: Berkeley, CA Posts: 586	I asked at my dealer today as I picked up the Repair manual for my 94 4runner, and it is going in to be fixed tomorrow. Good with some free stuff after my transfer case replacement.

10-10-2005, 02:23 PM	#80 (permalink)
jodaso2 Registered User Join Date: Sep 2005 Location: El Paso, Texas Posts: 11	they are giving everyone the "you need to replace your idle arm" routine. I got it and a couple of my friends got it. It your vehicle pulls take it back and ask them to realign. they tend to forget and then try to blame it on the idle arm (tip from a former toyota tech). It is how they make a little money from the free recalls.

10-18-2005, 09:21 PM	#85 (permalink)
mach4 Registered User Join Date: Oct 2005 Posts: 139	Last month, I had the T100 in for service at my local toy shop (not a dealer). They said my left and right ball joints were "bad", and that the idler arm had play. So I had them lift the truck and the tech showed me the play by simply moving one of the tires back and forth. So I need some recommendations on how to proceed. I'll need both ball joints replaced, the idler arm, and the relay rod as part of the recall. Should I take it in to the shop and get the ball joints/idler arm replaced, and then go into the dealer for the relay rod? I can't imagine I'll get ahead by letting the dealer do it all!

10-19-2005, 09:25 AM	#88 (permalink)
Blizzard Registered User Join Date: Jul 2004 Location: Barcelona (Spain) Posts: 912	Somebody could call for me? I've never heard of recalls in Spain (Yeah, here Toyota sales trucks and cars, later of paying you don't exist for them...) My 4Runner is diesel but except for cosmetics and the engine is almost the same. My VIN # is JT111GND0008004200. If someone can make me this favour I'll be very please David __________________ '94 Toyota 4Runner 3.0 Turbo Diesel Intercooler Auto – Trail-Gear 4'' SAS front, Trail-Gear 5'' rear leaves swap, 35's, FR&RR E-Lockers and too many things more to write...

10-27-2005, 07:39 AM	#89 (permalink)
Injohneer Contributing Member Join Date: Aug 2004 Location: Tulsa, OK Posts: 667	So has anyone actually gotten one of the Service Campaign letters yet? I see that several of you have gotten the service done, but did you just ask the dealer to do it or did Toyota contact you first? __________________ Trail/Build Rig: 1981 Toyota Pickup 4x4, flatbed Tow Rig: 2001 Chevy 2500HD Duramax 4x4, X-cab Long Bed. Will be my tow rig, when I get a trailer. RIP: 1995 4Runner.

10-27-2005, 07:56 AM	#90 (permalink)
admiral Registered User Join Date: Jan 2005 Location: Germany Posts: 56	I am still waiting from Toyota to contact me so they can do the service on my 4Runner. It has been a month. I am starting to loose faith.... __________________ 1992 4Runner SR5 V6 3.0L 4wd---In Germany 2000 ZR2 S10 4.3L Vortec--------In El Paso 1990 300zx 3.0l 2seater----------In El Paso 1975 Scottsdale stepside 350sb--In El Paso ROCK ON!!!!!

10-27-2005, 12:21 PM	#92 (permalink)
outdoorfever Contributing Member Join Date: Mar 2003 Location: Concord NC Posts: 1,058	i just made an appointment with the dealer for monday at 7! I am sure they will say i need a new inner tie rod and idler arm. I think I will just pay for that stuff. But anyways I don't have to wait since the dealer finally has the vin# __________________ -Kyle Forasmuch then as Christ hath suffered for us in the flesh, arm yourselves likewise with the same mind: for he that hath suffered in the flesh hath ceased from sin; That he no longer should live the rest of his time in the flesh to the lusts of men, but to the will of God. GOD IS A CONSUMING FIRE!!

10-27-2005, 01:12 PM	#93 (permalink)
photomike72 Registered User Join Date: Jul 2003 Location: Dallas, TX Posts: 219	I called the 800 number above as I'm not the original owner and woulndt have gotten a letter. Toyota Corporate verified by VIN # that I qualified for the recall over the phone, and directed me to the nearest dealer and said I didnt need anything to get it done. In the shop the next day and out the day after that. Easy Cheesy. Mike __________________ 1994 4Runner SR5 V6, 2nd HG, Downey headers and custom crossover, Aisin manual hubs, full OME suspension, Optima Red Top, Carsound hi-flow cat, Magnaflow with 2 1/4" pipe, K&N drop-in, Yakima rack, F/R diff breathers, BF Goodrich A/T's, ARB Bull Bar, "Highway Blaster" horns, more to come......

10-27-2005, 04:11 PM	#95 (permalink)
Randomness Registered User Join Date: Aug 2004 Location: Sammamish, WA Posts: 1,385	Is this something that's important to get done? __________________ 95 3.slow SR5 4runner 160K miles \| 32's \| OME \| Optima \| Husky \| dechromed \| ryan \| My Photography Blog

10-27-2005, 04:29 PM	#96 (permalink)
leebee Contributing Member Join Date: May 2004 Location: marlbank, canada Posts: 2,449	considering it is steering related, yes. lee __________________ 93 sr5 v6 auto, 4x4 Photos http://s866.photobucket.com/albums/a...albumview=grid there are quite some attractive ladies on here with Toys. (compliments of ironmike) ifsc 3(.0) http://tlca.org www.of4wd.com www.sontt.com

10-27-2005, 07:40 PM	#97 (permalink)
freshman Registered User Join Date: Sep 2004 Posts: 276	canada residents, are we included?

10-28-2005, 09:20 AM	#98 (permalink)
Keggo Contributing Member Join Date: Oct 2004 Location: Bakersfield, CA Posts: 1,831	Just called, my appt. is on Monday at 7:30am... __________________ - Kevin E. G. SOLD!!! '91 4Runner SR5 V6 5spd: CLICK!! FOR SALE NOW! Proud dad of Kai E. G.!

10-28-2005, 11:45 PM	#99 (permalink)
CoedNaked Registered User Join Date: Apr 2004 Location: Vancouver, British Columbia, Canada Posts: 1,473	I'm Canadian. Just had mine done this past Wednesday. Yes we are included. __________________ 1993 Xtra Cab Pickup \| 4x4 \| 3.0 - V6 \| R150F \| Silver-Grey \| Amsoil 10w30 synthetic oil \| Amsoil Synthetic Drivetrain fluids\| Borla Cat-back Exhaust \| OME HD Leaf Springs \| Bilstein HD Shocks \| Downey Idler Arm Brace \| Grey Husky Liners \| SR5 Bucket Seat Swap \| Color matched Canopy \| Yakima racks \| Line-X OTR \| Michelin LTX A/T 31 x 10.5 x 15 \| 323,600 KM's (202,250 miles) \| Made in Japan - Vin starts with "J"\| Fish on

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARB bumper 90-95 4Runner and 89-95 truck	Corey	The Classifieds GraveYard	13	06-30-2006 02:35 PM
89-95 pickup/90-95 4runner white face indiglo guage faces	MorphiasX	86-95 Trucks & 4Runners	1	06-24-2006 08:54 PM
ARB bumper ('89 to 95 truck, '90 to 95 4Runner)	Corey	The Classifieds GraveYard	1	03-27-2006 09:22 AM