Rear quarterpanel trim on 4Runner
#1
Registered User
Thread Starter
Rear quarterpanel trim on 4Runner
Has anyone trimmed this section of quarterpanel out of their 4Runners?? I was thinking of trimming it out so I could tuck my rear bumper up higher and have a straight shot mount to the frame.
Here's an under shot. It shows the body mount attached to the inside.
I had alittle bit of damage last summer running with no rear bumper
Looks like a pretty critical area since the rear tailgate hinges attach to it.
Here's the inside body mount
I know some guys cut that out and end up running a truck tailgate. I need to keep the stock gate and glass for the kids. I know the tailgate will hang down but I was going to build a bumper to protect it.
Here's an under shot. It shows the body mount attached to the inside.
I had alittle bit of damage last summer running with no rear bumper
Looks like a pretty critical area since the rear tailgate hinges attach to it.
Here's the inside body mount
I know some guys cut that out and end up running a truck tailgate. I need to keep the stock gate and glass for the kids. I know the tailgate will hang down but I was going to build a bumper to protect it.
#2
Registered User
#3
Registered User
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
icentropy
86-95 Trucks & 4Runners
10
07-11-2015 07:21 AM