Got an Install Date! 5" up, up & away!!! My '85's Buildup
#61
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the kudos guys & gals!!! I am friggin DEAD TIRED, yet I wanted to get these up TONIGHT!
I know it looks stupid with those tires. I got to save up some $$$ to get those 33x12.50 15's. I will see what I can do within a month or so. I wasn't going to wait for the tires to do the lift. It's not THAT bad, those fiberglass fenders really make them look small though!
Time for a smoke, shower, bed.
John
I know it looks stupid with those tires. I got to save up some $$$ to get those 33x12.50 15's. I will see what I can do within a month or so. I wasn't going to wait for the tires to do the lift. It's not THAT bad, those fiberglass fenders really make them look small though!
Time for a smoke, shower, bed.
John
#63
Registered User
Looks great John! Quite a bit of work in one weekend huh? I did that amount of work for 2.5 months to get my junk ready
I think you need to skip the 33's and go straight to 35's, they would fit and look much better than the 33's IMO.
I think you need to skip the 33's and go straight to 35's, they would fit and look much better than the 33's IMO.
#64
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
I haven't gotten the gears or lockers yet. I have to work some extra OT to get that taken care of. I will see what I can find. I may do the 33's first yet I am not 100% if I will just go to the 35's. I really want em, I just don't know what the $$ will look like in the near future. I have a bonus coming up in July, if I can get geared before then I will jump to the 35's. For the time being I am going to be keeping an eye on Craigslist for some local 33's or 35's. I just don't want to choke my 22RE without the gearing.
How do ya like those fiberglass fenders Volcom?
John
#65
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
I am out shopping for 5.29 gears. What manufacturer would be recommended? Yukon? Motive? Who else?
Which gear brand SHOULD NOT be purchased?
John
Which gear brand SHOULD NOT be purchased?
John
#68
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
I haven't had it out to flex yet as I am letting the ubolts and springs settle in a bit. I have done little dirt mount poser stuff last night, nothing worth of a camera though! I will work to get that done for you guys. It's gonna look even more like a roller skate with articulation, 5" of lift and 31" tires!!
John
John
#71
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Are 'Motive Gear' brand gears like? I have heard they are just as good as Yukon Gear. Hey Hayes, can you swing me a deal on some BFG 35" @ a Discount down here in Phoenix?
Thanks!
Thanks!
#73
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
I dunno Slacker. I just can't seem to get over HOW MUCH ROOM there is on the front end. I think that perhaps I may have to run a 40" tire up front and a 35" in the rear just to compensate for the extra clearance.
j/k! I LOVE IT!!!!!!!!
I will get er cleaned up and shoot some pictures when the 33" are on and will send them to you for your website (if you'd like!)
John
#74
Registered User
Join Date: Aug 2005
Location: Springs, Colorado
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
I do like those fenders, but like you said, if you had a pickup or could tub the rear you could run "FO Ds" with no lift
I am getting the trail gear gears, ive heard they use tons of different manufactures plus a lifetime warranty.
I am getting the trail gear gears, ive heard they use tons of different manufactures plus a lifetime warranty.
#76
Registered User
Join Date: Feb 2006
Location: Mooresville, NC but college at Auburn, AL
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
yeah im doing alot of the same stuff im interested to see yours come together. just got my TG 5in and now am lookin for 36's and gears and maybe a dual case eventually. good luck with everything
#77
Registered User
iTrader: (1)
I dunno Slacker. I just can't seem to get over HOW MUCH ROOM there is on the front end. I think that perhaps I may have to run a 40" tire up front and a 35" in the rear just to compensate for the extra clearance.
j/k! I LOVE IT!!!!!!!!
I will get er cleaned up and shoot some pictures when the 33" are on and will send them to you for your website (if you'd like!)
John
j/k! I LOVE IT!!!!!!!!
I will get er cleaned up and shoot some pictures when the 33" are on and will send them to you for your website (if you'd like!)
John
maybe one day i'll make some rear 1/4r's to match .. , and yes absolutly on the pics .,.
#78
I prefer Precision or US Gear, you know what you are getting with those.
Stay away from Genuine. Yukon seems to be hit or miss...
Setup is just as important, if not more important. Contact ZUK @ gearinstalls.com. He is local and will get you setup right.
Stay away from Genuine. Yukon seems to be hit or miss...
Setup is just as important, if not more important. Contact ZUK @ gearinstalls.com. He is local and will get you setup right.
#79
Registered User
Thread Starter
Join Date: Jan 2007
Location: Phoenix, AZ
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
2 - Motive Gear 5.29's for Toyota 8"
2 - LockRite Lockers (Picked just to gauge the cost of a package)
2 - Master Install Kits
The total price was $990. Shipping to AZ was $50. Your shipping may differ.
I will have to wait to make that purchase. I have to get the A/C fixed (MANDITORY IN AZ W/ HAVING KIDS) and the front drive shaft ($300 for 12" slip yoke and labor.) Last night I picked up a set of BFG MT's 33" for $500. They have 3k miles on them, have the little nipples on the sides (new indicators) and came with Free Replacement warranties.
Pictures will soon follow when they are mounted!!
John
Last edited by LUV24BY; 04-26-2007 at 01:21 PM.