I searched for years and the wait is over - 1982 1st gen is MINE!!
#21
Registered User
yea.. we'll see how long that lasts. itll go from this to 4inch springs, 37" Boggers, dual cases, longs, 5.29s, locked F&R yadayada lol, atleast i hope
#23
Registered User
Join Date: Jan 2010
Location: Fox Valley, WI
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Very friggen nice man!! Nice to see that there are still suckers out there that get rid of the 1st gens. Not my idea of a smart move, But who am i. Once again gl with all the potental it has to offer.
#28
Registered User
Thread Starter
I started to dive into this thing yesterday. First order of business was to find out where the oil leaks are coming from. After a steam bath with some degreaser the majority of the leaks are coming from the valve cover gasket and half moons. After I changed those things were pretty good up top. Turns out one of the vacuum lines was mixed up on the dizzy. After I did the timing and a valve adjustment the thing fires and runs GREAT and no leaks.
NOW for the down under... The output shaft seal is pissing all over the place. I am reasonably certain the rear main is weeping but I need some more time to determine that. There is a hole in the header at the base where it meets the muffler. There is no cat, so that is a major issue being I live in CA. The rear diff is leaking I think.
And so it begins!
NOW for the down under... The output shaft seal is pissing all over the place. I am reasonably certain the rear main is weeping but I need some more time to determine that. There is a hole in the header at the base where it meets the muffler. There is no cat, so that is a major issue being I live in CA. The rear diff is leaking I think.
And so it begins!
#29
Registered User
Join Date: Aug 2008
Location: Dahlonega, GA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Fix that bed quick! Good find. Since the weather here in the south is getting warmer, the 1st gens are coming back out, we wave at each other like bikers. It's great to see another one still kickin'
#31
Registered User
Thread Starter
I am perplexed! Could someone with factory bucket seats in a 1st gen tell me if they recline?? I can't find the handle to save my life.
Also, what is the deal with the heater. When it is on high it only blows on the window and the floor. Does the heat blow on the driver and passenger directly? I know older VW models they only blew on the window and floor.
Also, what is the deal with the heater. When it is on high it only blows on the window and the floor. Does the heat blow on the driver and passenger directly? I know older VW models they only blew on the window and floor.
#32
Registered User
I got a shortbed I might be looking to get rid of off my '83. Far as I know it's been a SoCal truck it's whole life, hardly any rust. Not sure when I'll be heading back to Oregon to see family, but I got a friend that lives in Brookings...
#34
Registered User
Nice, had to try. I'm hoping I can get rid of it for a lil bit of money to someone who needs it, since my cab is already a lil beat. I'll be watching your mods on this one still, gotta get ideas where to go with mine once it's driveable.
#40
Registered User