82 clean up/ build/ paint
#1
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
82 clean up/ build/ paint
I started off buying this truck before my deployment to Afghanistan had it three weeks then had to leave i had no time to make it mine. However now i am home and have great resources to get this thing going.
As you can see this truck was rattle canned and the undercoat wasn't something to brag about.
[IMG]
bed was little rought but interior was nice
engine could use a good bath
well now that we have the before things pretty much shown my next post will be the in progress things as we go on
As you can see this truck was rattle canned and the undercoat wasn't something to brag about.
[IMG]
bed was little rought but interior was nice
engine could use a good bath
well now that we have the before things pretty much shown my next post will be the in progress things as we go on
#2
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
we started by tearing things apart
now to start the real fun the body work
now one door jam is done
starting on under the hood
going back together with it and the fender wells
interior stripped and reundercoated
framed cleand up
now that we are caught up todays projects are to paint the parts orange so that i can completly reassemble the motor and accessories and make it run again. all so i can pull the front axle clean it up and install highsteer
now to start the real fun the body work
now one door jam is done
starting on under the hood
going back together with it and the fender wells
interior stripped and reundercoated
framed cleand up
now that we are caught up todays projects are to paint the parts orange so that i can completly reassemble the motor and accessories and make it run again. all so i can pull the front axle clean it up and install highsteer
Last edited by 82odyota; 08-27-2009 at 09:34 AM.
#6
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
as far as i know it is an original radio/ cassette player and it does work. Thought about putting in a cd player but i think i am going to leave it all original and keep it looking clean. Only gauge that does not work is the temp gauge in the dash i need to play with it more and try to get it to work until then i have a external down by the shifter.
Trending Topics
#8
Registered User
Join Date: Aug 2007
Location: Cleveland, TN
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
I saw the first pic and was like, gee what a rebuild. Then I saw all the hard work and realized how much you are doing. Two thumbs way up! I'm lovin the orange!
#11
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
i am in the national guard in illinois part of an infantry company 2/130 INF. just the usual weekend warrior things katrina, overseas training and OEF is my story
Last edited by 82odyota; 08-27-2009 at 08:33 PM.
#12
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
so today we spray most of the under the hood parts still need to do valve cover p/s cooler, and fan shroud.
Then i put them back in under the hood and started hooking other hoses and misc things up. Still will be a little bit before things are all back together under there and ready to go but have a good jump on it so far.
then i had some time left over so i finished out my radiator support flat black in front and undercoated with 08881 on back side
also started stripping the doors so we will have something else to fix while paint dries or we are redoing the dash and cleaning it up.
well i have to work night through the weekend so progress willl be a little slower only in father in laws spare time fora few days. hope to have trim out done on doors and roof primed soon. then on to cowl. after that who knows doors/fenders/hood/dash.....then i will be finding a bench to put in it for the little man and wife to be able to ride with me.
if anyone has suggestions or ideas.. throw them at me i will consider any ideas...
Then i put them back in under the hood and started hooking other hoses and misc things up. Still will be a little bit before things are all back together under there and ready to go but have a good jump on it so far.
then i had some time left over so i finished out my radiator support flat black in front and undercoated with 08881 on back side
also started stripping the doors so we will have something else to fix while paint dries or we are redoing the dash and cleaning it up.
well i have to work night through the weekend so progress willl be a little slower only in father in laws spare time fora few days. hope to have trim out done on doors and roof primed soon. then on to cowl. after that who knows doors/fenders/hood/dash.....then i will be finding a bench to put in it for the little man and wife to be able to ride with me.
if anyone has suggestions or ideas.. throw them at me i will consider any ideas...
#15
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
you don't have to bag a truck to make it look nice i am working on more pictures of thing did some roof work and the other door frame should be in primer as soon as the cowl area is ready. Long last 10 days workin 3 off one then on 4 so i will try to update as i get little by little done hopefully next week will bring more progress mon-fri ...also any suggestions with fenders should i cut and roll the orignal 82 fenders or will like a set of 85's fit just need to get them higher for tire clearance. thanks for all the comments. wasn't sure if i should have went ahead with this project but i wanted one when iwas 15 so i figured why the hell not
#18
Registered User
Thread Starter
Join Date: Jun 2008
Location: Palestine, IL
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
roof is blocked cowl is blocked ready for primer as soon as door opening is finished then block and reprime then shoot it with some color. pics soon holiday and work havn't let me get them posted
#20
Registered User