Need help finding roof rack parts for 3rd gen

Subscribe
Feb 10, 2009 | 09:05 AM
  #1  
I'm looking to extend my stock rack and need the rail that attach to the truck itself. I can't seem to turn anything up and don't have a local pay and pull junk yard. My intentions are to cut the purchased section and run them up and beside the sun roof giving me another area to attache yakima cross bars w/o using the kind that clamp the inside of the doors.

Aaron
Reply 0
Feb 10, 2009 | 09:18 AM
  #2  
Yakima sells a rail that is close to the same as the stock Toyota ones. These.
Reply 0
Feb 10, 2009 | 09:54 AM
  #3  
I'm a little particular and will want them to match 100% Though if I can't find em I'll be replacing my stock ones for sure (Though I don't want too).

Aaron
Reply 0
Feb 10, 2009 | 10:16 PM
  #4  
Try Ebay Motors: http://cgi.ebay.com/ebaymotors/Toyot...3A1|240%3A1318
Reply 0
Feb 11, 2009 | 07:58 AM
  #5  
yea, ur only luck is a junk yard'd 4runner, not available thru dealer anymore.
Reply 0
Feb 11, 2009 | 09:46 AM
  #6  
hey man i have mine that i took off my runner when i built my custom rack and would b willin to sell and i also work for a company that does a lot of shipping through ups so i get great rates so jus pm me
Reply 0
Feb 11, 2009 | 11:36 AM
  #7  
Hook me up with some rack parts
Hey there! So you have some parts eh? I only need the two rails that attach to the roof and nothing more other hardware. I anticipate using nut certs to get em hooked up and cut them to a desired length along the roof line. Kinda like the rails this guy used but I'll use the stock ones. Shipping to 33477 Ground UPS or Fedex USPS prio whatever...Thanks again

http://www.toyota120.com/forum/showthread.php?p=40882


Aaron
Reply 0
Feb 11, 2009 | 01:30 PM
  #8  
yea i got them shipping b like 15 bucks how much u will to pay for them
Reply 0
Feb 11, 2009 | 01:59 PM
  #9  
$30 shipped?

Aaron
Reply 0
Feb 11, 2009 | 04:11 PM
  #10  
got the stock hardware for the cross bars? esp the 'nuts' that slide into the rail.
Reply 0
Feb 11, 2009 | 04:41 PM
  #11  
Quote: got the stock hardware for the cross bars? esp the 'nuts' that slide into the rail.
Won't need em as I'm using Yakima hardware after the rails are installed, I will order some nutcerts from mcmaster and tap into my roof and extend the rack.

Aaron
Reply 0
Feb 12, 2009 | 08:16 AM
  #12  
I remember seeing this thread on expo. Its for 72" replacement rails.

http://www.expeditionportal.com/foru...nner+roof+rack

http://www.expeditionportal.com/foru...1&d=1232412003

I would love to have a basket in the front that I could mount lights behind a clear fairing!
Reply 0
Feb 12, 2009 | 08:42 AM
  #13  
I pm'd him on expo thanks for that. I also wondered if there were any sunroof bits that might be in the way. I'm not sure where the motor is mounted but if someone had a schematic of the toyota roof that would be awesome.

Aaron
Reply 0
Feb 12, 2009 | 03:51 PM
  #14  
Quote: Won't need em
wanna send em my way then?
Reply 0
Feb 12, 2009 | 05:33 PM
  #15  
Quote: wanna send em my way then?
Tossed em years ago tried to sel them but no body wanted them so to the scrap yard sad day

Aaron
Reply 0
Nov 2, 2009 | 08:17 PM
  #16  
Still in dire need of the 4runner roof rack trays (portion that mounts to the truck).....the part out vehicle did not work out as they were either spoken for or my pm's went unanswered.

A
Reply 0