Toyota SR5 Bucket seats

Subscribe
Dec 6, 2009 | 09:15 PM
  #1  
So I went to pick n pull with my brother ( MKtaco_98 ) today. and scored some SR5 seats out of a ext. cab toyota they're blue though... ( ehhh ) but nothing a little paint and some seat covers cant change! I'm gonna dye the plastic black and throw some black wet okles seat covers on them and they'll be as good as new! Here they are... a little on the dirty side but no rips or tears! theres a small wear mark on the driver seat. Sorry for those of you I didn't text about going! Me and my brother were just in the neighborhood and it was 4:00, they closed at 4:30 :/

Name:  DSC_0004.jpg
Views: 1778
Size:  108.3 KB

Name:  DSC_0005.jpg
Views: 1056
Size:  131.4 KB

Name:  001.jpg
Views: 1129
Size:  153.1 KB


Reply 0
Dec 6, 2009 | 09:47 PM
  #2  
Nice score! You'll love those seats, be sure to put up some pics once you get the okoles on...
Reply 0
Dec 6, 2009 | 09:52 PM
  #3  
definitely will I had buckets originally in my 4runner, so its not really much of a difference. Just the SR5 is the new quality hah I really cant wait to get these bad boys in the truck. the black is gonna look good, i'd say.
Reply 0
Dec 6, 2009 | 09:56 PM
  #4  
Quote: So I went to pick n pull with my brother ( MKtaco_98 ) today. and scored some SR5 seats out of a ext. cab toyota they're blue though... ( ehhh ) but nothing a little paint and some seat covers cant change! I'm gonna dye the plastic black and throw some black wet okles seat covers on them and they'll be as good as new! Here they are... a little on the dirty side but no rips or tears! theres a small wear mark on the driver seat. Sorry for those of you I didn't text about going! Me and my brother were just in the neighborhood and it was 4:00, they closed at 4:30 :/



you did not call me so i could tag along oh well maybe next time.
Reply 0
Dec 6, 2009 | 10:11 PM
  #5  
yeah sorry about that. Were gonna go again tomorrow sometime so i'll text/call you when we start to head down there. not sure if you have work on mondays or not. but i'll letcha know. the reason i didn't call anybody was because we had to drive past rancho and as I was driving back I decided to just stop by real quick... it was at like 4:00 and it closes at 4:30.
Reply 0
Dec 6, 2009 | 10:34 PM
  #6  
Quote: yeah sorry about that. Were gonna go again tomorrow sometime so i'll text/call you when we start to head down there. not sure if you have work on mondays or not. but i'll letcha know. the reason i didn't call anybody was because we had to drive past rancho and as I was driving back I decided to just stop by real quick... it was at like 4:00 and it closes at 4:30.
ya no need to call tomorrow i work weird hours so im sure i wont be able to make it.
Reply 0
Dec 6, 2009 | 10:38 PM
  #7  
haha alrighty. I'll text you and everybody else just to send out the invite were gonna be going around 11 - noon tomorrow, if it isn't raining. My brother and I only had time to rip out the seats in that truck... it was wayyyy in the back so the walk took most of the time, sucked majorly... i thought they closed at sunset :/
Reply 0
Dec 7, 2009 | 05:49 AM
  #8  
Hey MaK, you could also completely re dye/paint the entire seats black. There is some paint made by duplicolor that is made specifically for vinyl, fabric, and carpet. Not sure if you read my thread in the Pre 84 section where I painted my carpet. Looks excellent and I think this could work for you especially since you'd keep the stock SR5 look (not seat covers) and it would only cost around $7 assuming you only use one can but you might need two for both seats.
Reply 0
Dec 7, 2009 | 06:36 AM
  #9  
you scored me some buckets cause you found those! now i get your old ones good work mak good work.
Reply 0
Dec 7, 2009 | 06:49 AM
  #10  
I will have to post a pic of my sr5 seat score! Too bad it's raining right now. I wanna bring the sawzall and find a muffler!
Reply 0
Dec 7, 2009 | 07:34 AM
  #11  
hahah yeah like we did last time..
Reply 0
Dec 7, 2009 | 07:43 AM
  #12  
Quote: I will have to post a pic of my sr5 seat score! Too bad it's raining right now. I wanna bring the sawzall and find a muffler!
mike has a spare muffler from his old exhaust ill take some pics today if you want im at work so not too far away
Reply 0
Dec 7, 2009 | 07:51 AM
  #13  
Quote: Hey MaK, you could also completely re dye/paint the entire seats black. There is some paint made by duplicolor that is made specifically for vinyl, fabric, and carpet. Not sure if you read my thread in the Pre 84 section where I painted my carpet. Looks excellent and I think this could work for you especially since you'd keep the stock SR5 look (not seat covers) and it would only cost around $7 assuming you only use one can but you might need two for both seats.
haha I'm just gonna cover the seats with a seat cover and dye the plastic and the knob on the side. I think it'll be much easier and less of a hassle for me that way

Quote: I will have to post a pic of my sr5 seat score! Too bad it's raining right now. I wanna bring the sawzall and find a muffler!
yeah dude, if you want my old muffler, you can have it haha. take it to andrew, and he'll only charge you 60 bucks for piping since you didn't buy a muffler. just get a cat back and a cool tip haha
Reply 0
Dec 7, 2009 | 05:38 PM
  #14  
Didn't get much done on the seats today. but here what I did this morning! vacuumed them... didn't change them much, they're still dirty as hell. next step is paint the plastic. and get the cloth steam cleaned! I'm hoping after the steam clean, it'll have the original bright blue color again... ( not )

Name:  014.jpg
Views: 769
Size:  68.3 KB


Reply 0
Dec 7, 2009 | 08:26 PM
  #15  
Lol you vacumed em in the house? dont bring em down to be cleaned tomorrow there not working btw
Reply 0
Dec 7, 2009 | 08:32 PM
  #16  
lmao do you have any idea how cold it was yesterday morning? damn straight I cleaned them in the house...
Reply 0
Dec 7, 2009 | 08:41 PM
  #17  
Wich pic n pull did you go to, the one on sunrise blvd ?, did they have any first gen 4Runners there ?.
Reply 0
Dec 7, 2009 | 08:57 PM
  #18  
we saw one 1st gen there and it was stripped still had small things on it was white
Reply 0
Dec 7, 2009 | 09:09 PM
  #19  
yeah we go to the one in rancho... off sunrise. the 1st gen had a welded in half roll cage, if you wanna go take it... lol
Reply 0
Dec 7, 2009 | 09:15 PM
  #20  
Quote: we saw one 1st gen there and it was stripped still had small things on it was white
That figures, you just about need to be standing there when they put a first gen 4Runner out, otherwise its just about stripped in a day. I need a rear window switch for my 86 4Runner, and what ever else that i can find that i think i can use or upgrade. I will be heading up there this saturday to check it out and see what i can find.
Reply 0