Whats the largest width I can go on a 96 tacoma?

Subscribe
Oct 24, 2009 | 04:37 PM
  #1  
I am looking to buy some new wheels/tires. I have stock lift. (NO LIFT). I don't want them to stick to far in or too far out! What width should I get with a 15" rim? Also what would be a good tire (mud look) to go with along with a size? I would like the tire to roll over the rim a little bit. (so obviously a wider tire than the rim right?) . So here's my question's that I would love answers for and if anyone has pictures then that would awsomeness!

-Largest width w/o sticking toooo far out of fender?
-Nice tire
-Nice size

Thanks alot!
Reply 0
Oct 24, 2009 | 04:57 PM
  #2  
33x12.50s... enough said

have a lift?
Reply 0
Oct 24, 2009 | 11:15 PM
  #3  
O forgot to mention stock height. No lift. So 12.5 is the widest without sticking out the fender well? Thanks mak92
Reply 0
Oct 24, 2009 | 11:22 PM
  #4  
maybe 265's, or a 33x10.50
lots of stuff here: http://ttora.com/forum/forumdisplay.php?f=2
Reply 0
Oct 24, 2009 | 11:42 PM
  #5  
So 35 absolutely won't fit my truck? I would really enjoy having these.
http://www.stylintrucks.com/part.asp...9333HEC-755461

Alright this is gonna sound dumb but I want an 8" wide wheel right? or 10?
What about this setup? What's a 4" backspacing? And does 4" backspacing work for my truck?

wheels
http://www.savannajones.com/products/92600_2XX_C_PG.htm

tires
http://www.tirerack.com/tires/tires....m=325QR5KM2RWL
Reply 0
Oct 24, 2009 | 11:50 PM
  #6  
stock wheels are fine but a 8'' with the correct back spacing will work just fine
Reply 0