Registered User
What'd that cherry bomb run you?
Oh....keep on eye on those gear oil levels, eh.
Oh....keep on eye on those gear oil levels, eh.
The Cherry Bomb ran me $29.99. Just replaced the drivers side rear axle seal. Thats why you see the oil on that rear end. I know looks like its been leaking or something. Its just from refilling it. Thanks for the heads up though.
Registered User
yeah thats the high temp copper rtv, not the red rtv.
it'll say copper high temp on it. the red stuff will probably burn right off
it'll say copper high temp on it. the red stuff will probably burn right off
Actually it doesnt say copper on it. Its plain old high temp RTV. I use it all the time.
Registered User
Quote:
Originally Posted by tortis
wear gloves with por-15. it sticks very well to your skin.
haha! x2 on this one...sticks to skin, shoes, clothes, and will not wear off of the clothes or shoes either!
great stuff though for controlling that rust!Registered User
those hangers are junk man.
go to a muffler shop and they will weld some on for pretty cheap.
i had a few of thoes hangers and they all broke.
go to a muffler shop and they will weld some on for pretty cheap.
i had a few of thoes hangers and they all broke.
Registered User
my uncle POR'ed his whole 66 pontiac le mans and he could drive in into a river and it will never rust again
Registered User
I did something similar on my exhaust. Straight out the back and it does not rub at all. Except mine is a bit larger. 3 inch stainless. No muffler.


I put mine up nice and tight to the box at the back to keep it away from the axle. I would have gone 2.5 inch but I had the 3 inch laying around. Oh and mines a TD.


I put mine up nice and tight to the box at the back to keep it away from the axle. I would have gone 2.5 inch but I had the 3 inch laying around. Oh and mines a TD.
Registered User
Quote:


I put mine up nice and tight to the box at the back to keep it away from the axle. I would have gone 2.5 inch but I had the 3 inch laying around. Oh and mines a TD.
You might want to delete your second picture in the first link, or move that key somewhere else, unless you don't mind other people "borrowing" your rideOriginally Posted by 82yota
I did something similar on my exhaust. Straight out the back and it does not rub at all. Except mine is a bit larger. 3 inch stainless. No muffler.

I put mine up nice and tight to the box at the back to keep it away from the axle. I would have gone 2.5 inch but I had the 3 inch laying around. Oh and mines a TD.
Registered User
Quote:
A Toyota that uses a key?? 95% of mine need something that will turn the switch when I get them, keys are optional!Originally Posted by b.miller123
You might want to delete your second picture in the first link, or move that key somewhere else, unless you don't mind other people "borrowing" your ride
