SAS'd now.... going with 60's
well birfields sux.... weak ass hell.
Im going with full width 60's I want hi-pinion in the front and only DS drop (Fords) 60's are hi-pinion and i cant afford custom dynatrac axles. What I really wanna do is put dual hi-pinion 60's only one steerable but..... If I use a Dodge or Chevy, 1 of 2 things have to happen... (1) Cut off my front hanger and make an extended one, then make custom shackles (2) Shorten the long side 3"-4" Using a Dodge or Chevy is the easy way out or...... Use a Ford Hi-Pinion 60 and Retube taking 3"-4" off the LS then using the std shortside Chevy/Dodge shafts and having the LS axle shaft cut and resplined. WMS to WMS 65"-66" and maybe use spacers to match the rear. I got a free 60 rear from my neighbor, need to get the WMS to WMS. So thats going in the back for now then somtime i will retube a front ford 60 to stock or maybe 3"-4" less to match the front. Or retube it to dually width so I can use those shafts. any ideas?? or anyone done this?? also how much should I expect to get for my current setup?? Front Axle w/gusset... -- AllPro Hi-Steer -- 4.88 Welded Hi-Pinion 8" ...... $700-$1,000??? Rear Axle w/gusset and 3-link/CoilOver tabs -- 4.88 Yukon Spool -- Disc Brake Conversion (not installed yet) ....... $350-$500++ ????? or just sell complete 3rd -- (5) Converted 6 Lug HUMVEE Military Double Beadlocks w/runflats also have (5) crappy (no value) 36X12.50 16.5 Goodyeay Military OZ tires and (1) 38X12.50 16.5 SuperSwamper TSL SX about 90% ........ $600-????? thanks |
So... are you snapping Birfields right and left like twigs?
What size tires you running? Why not put Longfields in the front? I know graphs (and marketing) can be a bit shady, but from what I have read and understand the Longfield super axles are really close if not stronger than the stock D60 axles. http://www.longfieldsuperaxles.com/graph.html Are you looking for added width, thus the 60's? What motor/ gears does your current setup have? Not knocking your ideas... just trying to learn. I currently have a Toyota axle SAS with Longs that I am very happy with. Just seems that putting Longs in there would stop your exploding Birf problem, require zero additional fab, and get you back out on the trail with more confidence as well as more money in your pockets. :great: |
yea Longs are awsome.... stock is weak when you wedge a tire at full lock with heavy ass beadlocks w/runflats and only 36's...
problem with Longs is that you now have a weak ring gear.... Longs last, gears after Longs dont.... you can have the gears cryo'd but I am ready to stepup to somthin more stable if i didnt want the added stability I would buy Longs 100% but I got extra stock crap to fix it for now until I get a front HP 60 retubed i am stock, stock, and stock..... stock 3.0 V6, stock A340H Auto, stock 4.88 gears I am gonna try and do this swap right out $$ wise..... sell all my current stuff to cover all the new stuff.... think it can be done?? I will be welded front and rear so most $$ will go into regearing |
Please Google Homegrown Crew Inc. Perhaps try Pirate.
Look at the Raisin. That is my old Diamond running 30 spline Longfields and 44's. These guys eat outputs and REAR diffs, not the HP fronts. To get significantly stronger than 30 spline Longfields, you are going to have to drop some coin. |
Originally Posted by customcruiser
(Post 50555105)
I am gonna try and do this swap right out $$ wise..... sell all my current stuff to cover all the new stuff.... think it can be done?? I will be welded front and rear so most $$ will go into regearing
I'd think you'd be stepping up to 38's... 40's or bigger to justify a fully built pair of 60's behind a 3.0 automatic... if 60's behind a stock 3.0 pushing 4.88's can be justified?? :think: You have any plans of upgrading the HP or adding a set of crawler cases? By the time I go to 60's (if I ever did, which I would really doubt) my rig would be unrecognizable as a 4Runner. There would be no glass left, every body panel would have received a good bit of trail massaging and I'd be wondering why my 40" tires where starting to look small again. :hillbill: |
You are talking about locating and modifying the holy grail of stock housings for the price of a stock Toyota solid axle. Good luck.
Ground clearance is going to be sweet too. Keep us posted. |
im gonna run atleast 40's maybe 42's.... i was gonna run 38's on toyota but I want more stability and even bust birfs with bald HUMVEE tires.
I can get a front HP 60 for under $250...... with alittle lookin and talkin... -- have to shorten the LS... $time -- retube the SS and make the LS.... $50 -- reuse the inner C's.... $time -- shorten a LS shaft..... $70 -- reuse SS shaft or get a Chevy/Dodge SS shaft.... $50 -- hi-steer arms..... $250 -- misc link material/rod ends/etc..... $250 looks like less than $1000........ maybe..... minus gearing ofcourse |
I will probally run 5.38 gears in the 60's Welded of course..... front & rear with hydro-assist
|
To be clear, you are breaking Stockfields, right? Hardly comparable to other choices.
You are getting the most desirable stock housing for $250? That is the big miracle to me. |
all stock......
i'm the man..... redneck USA if i had to get one now.... $700 if i wait i can probally get one for FREE!!!!! |
Hmmm sounds like FJ80 axles with longs would be a better solution. Beefier ring, longfields are plenty strong to hold onto those 36's or even 40's and I beleive they are high pinion. Lets not forget you can adjust pinion on toyota front ends... Your talking about doing housing trims for a better pinion from a ford axle why not this:
http://www.4x4wire.com/toyota/tech/rotated_housing/ Take a look at the arctic trucks they run 44's on Toy axles. http://www.4x4offroads.com/toyota-4runner.html |
80 axles are more $$ than a HP 60, i already run a HP 8" in the front.
for the cost of beefin up with Longs and swappin to an 80 axle i could do 60's. everytime i go out i beat my truck and come home to fix another piece on this damn front Toyota axle.... my wheel bearings go everytime they get muddy and i am breaking wheel studs left and right damn things are soo long. i would like to stick to Toyota but...... if i run 60's then i will never have to worry about breaking an axle again also full width for better stability....... <------- #1 thought about a T-100 and 80 for the front but will still have to upgrade so 60's it is but probally will not do any swapping for another year or maybe i will break all my spare birfs and then swap sooner |
Lol idk man get some ARP studs and build your front axle the right way. Six shooter TG knuckles with ARP studs, and longfield 30splines and hub bearings sounds like a cheaper/less time consuming route than 60's.
|
FJ60/62 front axles are the answer. 9.5" ring and pinion with longs your done. Plus it's easy to get 64" WMS to WMS out of one. I'm planning to run 42" with a 62 front and an 80 rear.
|
Originally Posted by customcruiser
(Post 50554987)
well birfields sux.... weak ass hell.
Im going with full width 60's I want hi-pinion in the front and only DS drop (Fords) 60's are hi-pinion and i cant afford custom dynatrac axles. What I really wanna do is put dual hi-pinion 60's only one steerable but..... If I use a Dodge or Chevy, 1 of 2 things have to happen... (1) Cut off my front hanger and make an extended one, then make custom shackles (2) Shorten the long side 3"-4" Using a Dodge or Chevy is the easy way out or...... Use a Ford Hi-Pinion 60 and Retube taking 3"-4" off the LS then using the std shortside Chevy/Dodge shafts and having the LS axle shaft cut and resplined. WMS to WMS 65"-66" and maybe use spacers to match the rear. I got a free 60 rear from my neighbor, need to get the WMS to WMS. So thats going in the back for now then somtime i will retube a front ford 60 to stock or maybe 3"-4" less to match the front. Or retube it to dually width so I can use those shafts. any ideas?? or anyone done this?? also how much should I expect to get for my current setup?? Front Axle w/gusset... -- AllPro Hi-Steer -- 4.88 Welded Hi-Pinion 8" ...... $700-$1,000??? Rear Axle w/gusset and 3-link/CoilOver tabs -- 4.88 Yukon Spool -- Disc Brake Conversion (not installed yet) ....... $350-$500++ ????? or just sell complete 3rd -- (5) Converted 6 Lug HUMVEE Military Double Beadlocks w/runflats also have (5) crappy (no value) 36X12.50 16.5 Goodyeay Military OZ tires and (1) 38X12.50 16.5 SuperSwamper TSL SX about 90% ........ $600-????? thanks |
60 series 60/62 Cruiser axles still use Mini birfields.
People are running 40-42's on 80 Series axles stock. Longfields are piece of mind. For everyone else but you, bulding 60's is spendy. Do you plan to run 30 splines in the 60 with stock joints? All you are gaining is width compared to a beefed Toyota. |
well i found a complete running F350 4x4 asking $1600.....
why not run HUMVEE rims with almost 8" of BS??? hub stick out too far?? i think shorting the longside 3"-4" and cutting and resplining the shaft (of a chevy) would be easier than cutting the hanger and remaking. but maybe im wrong. i was planning on running stock 35 inner/30 outters with stock joints i need more width for bashing trees and rocks while keeping the body decent. My driving style has changed from cautious/˟˟˟˟˟ to "it will make it" along with the birf i destroyed also got my front PS fender/ARB Bumper and rear DS back door and beyond also gonna get rid of the ARB bumper and put one of those nasty looking front hoops and build into the future exo |
Lol sounds like your doing this for the wrong reasons. Ever heard of an exocage or even just rock sliders with a tube running the fender... You can rub trees all day with that and not touch your body.
Good arctic 4runner and you'll find a well built Icelandic rig on 44 with mini axles. PS: If you really want that width why not get new wheels with 1 or 0 back spacing? |
Originally Posted by Stomis
(Post 50558093)
PS: If you really want that width why not get new wheels with 1 or 0 back spacing?
swapped the busted birf, we will see how long she holds the fenders are going anyways or aleast most of them like this :shocked: http://memimage.cardomain.net/member...99_22_full.jpg |
Originally Posted by customcruiser
(Post 50558138)
i dont think wheel bearings & wheel studs will hold up to that.....
swapped the busted birf, we will see how long she holds the fenders are going anyways or aleast most of them like this :shocked: http://memimage.cardomain.net/member...99_22_full.jpg |
Originally Posted by yotaman
(Post 50558189)
:dunno::think: Who in there right mind would put a HEEP bezel on a Toyota?
|
Kill switch...
|
had to post that for your amusement!!!!!
i would go with a TJ grill for sure!!! |
1 or 0" backspacing?
Great tech there. Arctic trucks don't rock crawl, Longfields do. This whole thread is not giving a fair shake to the Toy stuff and everyone who reads it will get lost. For what people NORMALLY pay for HP 60's, it would be cheaper and stronger to use a Diamond fron with 30 spline Longfields. What you are building will be wider and stronger than what you have, but not stronger than what you could have in a Toyota axle. |
Originally Posted by Flygtenstein
(Post 50560569)
What you are building will be wider and stronger than what you have, but not stronger than what you could have in a Toyota axle.
but I'm going with 60's |
well I have been debating which axles to go with for about 6 months.....
my buddy with Rocks had me convinced to use those (cost) since they are already geared. been researching them for a few months now even sourced a set. I have a set in a junkyard for $600 but I am not sure of the front since the 3rd sits soo high. Not a problem for the rear but it is for the front since I wanna keep the leafs for now ($$ for a 4-link & Shocks) So I decided to pull that 60 sitting next door but it actually ended up being a 14 Bolt FF with 4.10's. I am gonna run this and a Chevy 60 short side narrowed 3". got the rear ready for my brackets and have made them all. The C/O mounts I might buy from Ballistic Fab |
Originally Posted by Flygtenstein
(Post 50560569)
1 or 0" backspacing?
Great tech there. Arctic trucks don't rock crawl, Longfields do. This whole thread is not giving a fair shake to the Toy stuff and everyone who reads it will get lost. For what people NORMALLY pay for HP 60's, it would be cheaper and stronger to use a Diamond fron with 30 spline Longfields. What you are building will be wider and stronger than what you have, but not stronger than what you could have in a Toyota axle. dude if you hate your toyota truck so much, sell it and go buy a ford and beat the crap out of that, get a 78-79 f350, I hear they are real cheap and easy to find..... :hillbill: |
Doesn't sound like a Toyota hater at all, just sounds like a guy trying to have fun on a budget, at least he's wheelin' and buildin' and not working too many hours and doing more web-wheelin' than real wheelin':bigok: .....like I am!:(
|
Originally Posted by b.miller123
(Post 50673877)
consider me among the lost......................
dude if you hate your toyota truck so much, sell it and go buy a ford and beat the crap out of that, get a 78-79 f350, I hear they are real cheap and easy to find..... :hillbill: FJ80 axles cost too much. |
|
Kiss ground clearance behind on any tire smaller than 36's. Better get to shaving that thing... Better yet cut and reweld the bottom of the housing...
|
I will shave an inch or so and gonna run 42's or so
|
swapped the 16" Fox coilovers for some 18" Fox Air Shox.
they look a little plain but at least they are bigger. Cut off my front AllPro hanger and built a new one, using part of the old one and some 2x2x.250 for FW 31.5" center to center. It has a 2" drop compared to the AllPro hanger. but no pics yet Redid my lower link mounts using Ballistic Fab brackets along with some Ballistic Fab C/O and Lower Link mounts. Also sleeved (again) my lowers, they are 1.5x.250 DOM, sleeved with 1.75x.120 DOM, now sleeved with 2x.120 DOM = 2x.5 DOM...... yep 1/2" thick they are monsters. Also rear driveshaft is finished.... I hate needle bearings http://i217.photobucket.com/albums/c...1/IMG_2798.jpg http://i217.photobucket.com/albums/c...1/IMG_3123.jpg http://i217.photobucket.com/albums/c...1/IMG_3124.jpg http://i217.photobucket.com/albums/c...1/IMG_3125.jpg |
Where are you getting your leafs? I am wondering if I can use the toyota leafs or should I get some others? I am building my own hangar, just looking at leafs, got a pair of dana 60's from a friend for free :D can't beat that.
|
Originally Posted by 312necro213
(Post 50761332)
Where are you getting your leafs? I am wondering if I can use the toyota leafs or should I get some others? I am building my own hangar, just looking at leafs, got a pair of dana 60's from a friend for free :D can't beat that.
I like how the back is cut. got any more pics of it? I think its a bit much to cut but it still looks good from what ive seen in the pics you have |
Dana60s with 40s under a full bodied yota is possible... even the newer models. I have seen this setup with the glass fenders and they work like a charm. I'm not 100% sure what he did to achieve this but I could see if I can find out...
http://homepage.mac.com/turboale/.Pi...p/_MG_6017.jpg |
here are my build pics
http://pirate4x4.com/forum/showthread.php?t=551869 |
|
I like the roll cage. More pictures of the bobbed back! :D
|
|
All times are GMT -8. The time now is 09:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands