Originally Posted by 2DoorJoRunner
(Post 52162606)
Very thankful to have found this thread. I am installing my Downey headers currently and this has given me loads of info. The biggest concerns where the egr and pair not lining up but snagging the flex pipe off the stock manifold is a brilliant fix.
|
I got my headers for $75 bucks so I couldnt help myself lol. That coupled with I already have my highflow cat and borla muffler installed and I am in the middle of a trans swap I figured why not. My 3.0 is has been very well maintained by the p/o, and Ive been on top of things since. But alas I know its only a matter of time. I saw a 3.4 at pick a part today for $600 and it got my mind running...
|
Originally Posted by MaK92-4RnR
(Post 51239439)
Heres the video showing my exhaust
and heres the sound clip you all have been asking for :) GIVE ME FEEDBACK ON THIS. I WANT TO KNOW IF IM NOT THE ONLY ONE THAT LIKES IT. Lol :D |
Originally Posted by 2DoorJoRunner
(Post 52162919)
I got my headers for $75 bucks so I couldnt help myself lol. That coupled with I already have my highflow cat and borla muffler installed and I am in the middle of a trans swap I figured why not. My 3.0 is has been very well maintained by the p/o, and Ive been on top of things since. But alas I know its only a matter of time. I saw a 3.4 at pick a part today for $600 and it got my mind running...
but like I said, no way would I ever do it again and I have a 3vz again now. I spent probably 1000 bucks on this exhaust setup, and sure its the best of the best for the 3vz, but I can get a 3.4 for 1000 bucks. But like I said, I'd love to drop headers on a 3.4, no cat, o2 MILs and a sweet muffler. |
Well when you end up doing that Ill be sure to sub to that thread!
|
here is my complete exhaust. NWOR headers with the crossover, No Cat, 2 1/2 pipes and a thrush welded muffler. |
Originally Posted by bone collector
(Post 52163260)
3vze headers, flamethrower injectors and supra AFM - YouTube
here is my complete exhaust. NWOR headers with the crossover, No Cat, 2 1/2 pipes and a thrush welded muffler. |
Originally Posted by MaK92-4RnR
(Post 52163456)
sounds like you have an exhaust leak somewhere.
I did. I got excited about it running and took a video. :facepalm: it sounds much better now |
Bump
I wrote a review of the same exhaust after a couple years of driving it. Here's the link: https://www.yotatech.com/forums/f105.../#post52211607 In short, I recommend it. |
I suspect that a crossover delete tied to a proper cat back will accomplish >85% of what the full system with headers will do...
LCE sells their (all of these are mandrel bends) Y pipe for $200 (have to email them, not alone in their catalog) plus their full cat back, excluding cat, for $400. And the only custom would be down pipes from headers to Y pipe. The cat back and Y pipe can probably be reused with a 3.4. I think I'd enlarge the join portion of they Y and run a larger diameter from there through the exit of the cat, but otherwise, there's no reason you can't keep the LCE catback w/ a 3.4 IMO. Sort of a dual purpose if you will. Still on my to do, but that's my strategy... |
All times are GMT -8. The time now is 07:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands