|
91 yota first build
Got a 91 Toyota 4x4 3.slow. Finally got enough money and time to do my Sas. Putting 96 f150 springs in the rear and TG springs in the front. Doing hydro assist and putting in a second 3.slow in
|
Looks like you are well on your way. I like it already. Good luck to you and have fun. Sub'd!
|
Thanks. Still got a lot to do. Got a lot more packages coming in today for it and will hopefully start mounting the springs on soon
|
https://cimg5.ibsrv.net/gimg/www.yot...ac2a80201a.jpg
Finally got the front diff all set and put together with 5.29 gears https://cimg6.ibsrv.net/gimg/www.yot...a0cc64f385.jpg Got the diff on and now ready to build the front axle |
would like to see the results of this build. keep up the good work, pal.
|
Looks like you have been doing some great work. Welcome to Yotatech.
|
https://cimg9.ibsrv.net/gimg/www.yot...e5e3eaa726.jpg
https://cimg0.ibsrv.net/gimg/www.yot...e032ba4dd5.jpg https://cimg1.ibsrv.net/gimg/www.yot...8b4c7604d6.jpg First time taking a birfield apart and wasn't to bad got both apart and cleaned out and put back together in 20 mins. Tomorrow I got more packages coming in and hope to have the axle all put together and ready to be put on the truck |
Sorry guys that I havnt posted in awhile been really busy with the truck and also with work. I made my own upper bushings for the shackles and my all my own shackle plates all 5 in hole to hole
https://cimg6.ibsrv.net/gimg/www.yot...107ed4e2a.jpeg Taking apart one of my t-cases I got https://cimg7.ibsrv.net/gimg/www.yot...42ad600d4.jpeg Front axle https://cimg9.ibsrv.net/gimg/www.yot...ed039acbb.jpeg Almost done but started to put together and realized I need the backing plate eliminator. Learning stuff as I go sense this is all new to me https://cimg0.ibsrv.net/gimg/www.yot...db4435181.jpeg All apart https://cimg1.ibsrv.net/gimg/www.yot...da93f8b0a.jpeg https://cimg2.ibsrv.net/gimg/www.yot...446e46fe3.jpeg Front hanger on https://cimg3.ibsrv.net/gimg/www.yot...b9a45a9d5.jpeg Rear end on with Ford F-150 springs https://cimg4.ibsrv.net/gimg/www.yot...5f3ac4a56.jpeg Shackle angle really step I think at 30 deg. I feel like 25 is what I'm shooting for? Any input on this would be great help. https://cimg5.ibsrv.net/gimg/www.yot...0e5cdd6a2.jpeg https://cimg6.ibsrv.net/gimg/www.yot...b454db2f6.jpeg Gonna be tall. And that's with 33s on now<br/>But I have no weight in it no tranny or engine on the truck or no front end either https://cimg7.ibsrv.net/gimg/www.yot...b661db591.jpeg Redoing gaskets for tranny and getting ready for dual t-cases |
https://cimg0.ibsrv.net/gimg/www.yot...98395ad0f.jpeg
Made my own upper shackle bushing and all the shackle plates I need for front and back |
So got the dual t-case put together but having a issue with that last bolt about to just take the cut off wheel and try and cut the stud down a little. Or am I just doing something wrong?
https://cimg9.ibsrv.net/gimg/www.yot...6a16bc885.jpeg https://cimg2.ibsrv.net/gimg/www.yot...fc99de81c.jpeg https://cimg3.ibsrv.net/gimg/www.yot...e3456cc99.jpeg |
Right on! Cool build
|
super nice frame for MA, @yotav6power. Looking like a great start to super fun rig! good luck!
|
Thanks. When I did the flat bed for it we sandblasted it and painted the whole thing with por15
|
Well got a lot more done this weekend got the axle all together and under the truck now. Gonna pick away at getting the transmission all set and put back together with the dual case and hopefully next weekend the transmission and the engine will go in
https://cimg5.ibsrv.net/gimg/www.yot...6e83f2f1a.jpeg https://cimg6.ibsrv.net/gimg/www.yot...7f5a1acb4.jpeg |
Sorry guys I havnt posted in awhile been slow for me but getting back at it got a lot done this weekend but I don't have pics I'll try and get some tmr getting close to being done
https://cimg2.ibsrv.net/gimg/www.yot...512f30bc2.jpeg 3" tg springs in the front https://cimg3.ibsrv.net/gimg/www.yot...427c4736b.jpeg Ford F-150 springs in thee rear https://cimg6.ibsrv.net/gimg/www.yot...b9ba6809b.jpeg Dual cases https://cimg8.ibsrv.net/gimg/www.yot...a66137184.jpeg Drilling and tapping for hydro at work on the Bridgeport https://cimg0.ibsrv.net/gimg/www.yot...4137bbeb2.jpeg https://cimg2.ibsrv.net/gimg/www.yot...733111b5f.jpeg https://cimg3.ibsrv.net/gimg/www.yot...87e20d6db.jpeg Tg 3" springs were giving me problems that's with all the weight in so I had to switch springs https://cimg5.ibsrv.net/gimg/www.yot...f95a04f77.jpeg New springs in a lot better going with these https://cimg6.ibsrv.net/gimg/www.yot...c4deb2c29.jpeg 2nd gen toyota springs and added 2 of my old read springs to it and work out good to fix the problem I had with the tg 3" springs https://cimg7.ibsrv.net/gimg/www.yot...d215d654b.jpeg https://cimg9.ibsrv.net/gimg/www.yot...50df3e742.jpeg https://cimg1.ibsrv.net/gimg/www.yot...ea0c419c8.jpeg https://cimg2.ibsrv.net/gimg/www.yot...e2a1ff492.jpeg |
love the new box on it
|
| All times are GMT -8. The time now is 06:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands