Show off your swapped in seats!
 

Gonna be replacing the factory 1piece vinyl bench in my x-cab and was looking around for good ideas. SR5's would be great but are getting harder to find around town. Got me thinking about how many guys here don't even have toyota truck/4runner seats in their rigs and I'd love to see some pics and stories about how creative everyone has been with seat swaps.

Just used 95 4runner seats, bolted right in. No holes to drill- nothing

http://www.pandin.net/seat.htm

here is someone who made the 60/40s in to buckets. I am hoping to do the same soon because like you said the SR5 seats are really hard to find. And this way i can take it to an upholstery shop and get new foam and everything to make them nice and comfy. I think they will end up looking like factory seats when its all done and all for about $100 at the shop I am going to.

wow, will give some creativity points over to that guy. They look pretty factory-bucket when he was done considering what they used to be.

https://www.yotatech.com/forums/f116...ht=Bucket+seat


https://www.yotatech.com/forums/f116...ht=Bucket+seat


Search next time


:dj:

Mini-threadjack, but speaking of seats...
Has anyone swapped in heated seats into 1st gen 4Runner, and if so, from what? My friend's late-model Jetta had them, and they were soooo nice, it got me thinking about if it was possible to swap them in. Anyone try it?

I have seen kits to add the heating element to a seat..

MR2 Buckets, they're very nice and particularly good if you're tall. Much more head room now and I'm 6'3"
Attachment 187609
fronts bolt right in and the rear required a little modification with some stock steel. You Could just drill holes in the floor, but I didn't want to.
Attachment 187610

I have the same seats, mine are just faded :(

I got my out of a 89 Celica (sp?) from pick n pull while they had a sale on seats and they were only $12 each. They bolted right up I just needed a spacer and longer bolt for the back holes.

93 SR5 4runner seats into an 89 4runner.
Attachment 187590

OK out with the bench.
Attachment 187593
Blue seats, Nahh.
Attachment 187594
These work.
Attachment 187595
Dog friendly setup.
Attachment 187596

Teuf I love the ammo can console/linked round cup holder/bear humping the t-case mods. :lol::lol::scared:

Creature comforts.
http://i561.photobucket.com/albums/s...e/IMG_3596.jpg

Attachment 187625

i put some beard seats in with just the lap belts for now. i will be putting in an internal cage this winter then mounting the seats with the 5 point harness.

Doesn't your rig have a bed to store all that stuff? :roll:

Do 3rd gen 4Runner seats fit in a 91 SR5 4Runner? Mine are trashed and with a 3 year old and his temper tantrums, I'd like leather seats so I can wipe up stuff easier.

good question. I'd like to know that as well. If they'll go into a '91 Runner, they should fit my '87

I put the seats from the Geo tracker I had, engin seized, in my 1990. I had to use the tung from an old lawn tractor trailer,It was like 3" c chanle, to fab one side rail because of the seats are 3" different from the inside to the outside. These suckers sit about three inches higher then stock. That's good and bad. Good for my shortty wife bad for my head.
Attachment 187626

MKIII Toyota Supra seats, with the driver's side power seat wired up. :) Super comfy.

Attachment 187591

Attachment 187592