95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Any new performance goodies out there?

Thread Tools
 
Search this Thread
 
Old Sep 9, 2004 | 08:53 PM
  #1  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
Any new performance goodies out there?

Haven't heard of much new latley.. Anything out there or what? I'd still love to get headers but they just don't seem to be worth the money.. especially with installation

Last edited by nags; Sep 9, 2004 at 09:07 PM.
Reply
Old Sep 9, 2004 | 09:16 PM
  #2  
AUJWE
Guest
 
Posts: n/a
Why do you say in your sig that your truck is still slow? Relative to what? Isn't it faster than it was before all your $$$ went into S/C and URD mods?
Reply
Old Sep 9, 2004 | 09:16 PM
  #3  
AUJWE
Guest
 
Posts: n/a
BTW nice truck.

Check out the thread below on 'Remote Mount Turbos'. That seems to be the new thing.
Reply
Old Sep 9, 2004 | 09:22 PM
  #4  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
It's definetley faster.. Thats for sure.. Just not fast enough Will it ever be? I've still yet to have it properly tuned, so I'm sure that will change things quite a bit... Just wondering whats next. I like the water injection but I just dont think I'm ready to do it.. I dont think I want to be filling up with water everytime I get gas
Reply
Old Sep 9, 2004 | 09:27 PM
  #5  
AUJWE
Guest
 
Posts: n/a
You have to fill up the water for the WI kit that often? Hmm.

How much of a difference did the URD kit make?

Got any 1/4 mile runs in it?
Reply
Old Sep 9, 2004 | 09:30 PM
  #6  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
I installed the urd kit and s/c at the same time so I really don't know.. Never ran it either.. right now I'm sure it wouldn't do well.
Reply
Old Sep 9, 2004 | 10:18 PM
  #7  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
I guess theres just not a lot left to do right now.. Gotta bite the bullet and get headers I guess I really want some more low end/torque... But before any of that gotta get the tranny done

Spend most of my time over at customtacos.com and figured I might find some new stuff I didnt know about yet over here

Last edited by nags; Sep 9, 2004 at 10:22 PM.
Reply
Old Sep 9, 2004 | 10:28 PM
  #8  
AUJWE
Guest
 
Posts: n/a
Yeah, how is that tranny holding up? Any slipping yet?
Reply
Old Sep 9, 2004 | 10:30 PM
  #9  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
No, I don't think so.. Getting the fluid flushed tommorow so it should be nice. Hopefully soon I'll be able to send my valve body and torque convertor off to level 10. I need someone to write up some instructions how to pull that stuff first
Reply
Old Sep 9, 2004 | 10:35 PM
  #10  
AUJWE
Guest
 
Posts: n/a
Man you are dropping some serious change into that truck. That thing better be fast.
Reply
Old Sep 9, 2004 | 10:36 PM
  #11  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
Only stuff that was expensive so far was the S/C and URD kit.. the other stuff was just a little here and there.. Everything else is basiaclly stock. I'd love to put a system in it, but now you're talking serious bucks
Reply
Old Sep 9, 2004 | 10:50 PM
  #12  
AUJWE
Guest
 
Posts: n/a
Originally Posted by nags
Only stuff that was expensive so far was the S/C and URD kit.. the other stuff was just a little here and there.. Everything else is basiaclly stock. I'd love to put a system in it, but now you're talking serious bucks
Yeah, but stuff still adds up.

You can get a nice sounding stereo system w/o spending tons of money. Especially if you shop online for gear. Check out the Stereo Forum on here. There's lots of links in there to good places to buy audio stuff.

BTW, where are you located?
Reply
Old Sep 9, 2004 | 10:55 PM
  #13  
nags's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 322
Likes: 0
Audio stuff is my first love. I know quite a bit about it and know the exact system I would do when I finally get around to it. It's not the most expensive stuff out there, but ain't going to be cheap

I'm in Ft. Lauderdale, Florida
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
Feb 15, 2020 06:55 AM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
Nov 10, 2015 06:54 AM
Iceman4193
86-95 Trucks & 4Runners
22
Oct 16, 2015 10:50 AM
kbpickens
Newbie Tech Section
5
Oct 2, 2015 03:37 PM
oldblue
86-95 Trucks & 4Runners
0
Sep 28, 2015 04:07 PM




All times are GMT -8. The time now is 09:09 AM.