Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

1st gen noise during acceleration

Thread Tools
 
Search this Thread
 
Old Aug 4, 2013 | 03:38 PM
  #1  
bfett22's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 70
Likes: 0
1st gen noise during acceleration

I drove my truck about 400 miles round trip this weekend and it did pretty well (244600 miles) however about halfway there a noise started when accelerating. I pulled over to check things out and nothing appeared to be irregular. When I got home, I noticed that my pinion seal blew up and the third is leaking. I recently replaced it and both axle seals (axle seals held up). At one point in town, my truck slipped out of first. ..which has happened a few times before. Could the noise be coming from the tranny? ideas? When I let off the gas the noise goes away and then comes back when pressing the gas pedal - even had sort of a scraping sound at times. Thanks in advance for the help!
Reply
Old Aug 4, 2013 | 03:46 PM
  #2  
Chickenman's Avatar
Registered User
 
Joined: Sep 2011
Posts: 200
Likes: 0
From: Citrus Heights CA
Have you checked the u joints?
Reply
Old Aug 4, 2013 | 04:26 PM
  #3  
bfett22's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 70
Likes: 0
Ehh well there is some fluid on the front drive shaft and it feels like the noise is coming from that area...I rotated the shaft and it did so OK. I tried to move the u joint but there wasn't any play..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vanion2
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
Jul 29, 2015 06:17 PM
noahstancik
86-95 Trucks & 4Runners
0
Jul 17, 2015 05:38 PM
smiley52
86-95 Trucks & 4Runners
8
Jul 11, 2015 05:16 AM
coryc85
Misc Stuff (Vehicle Related)
0
Jul 6, 2015 04:07 AM




All times are GMT -8. The time now is 09:47 PM.