Before Anything, about a week after i bought it.


Windows Tinted to 5%


3" OME



PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!!

 

Here are my tails i just did on 3-17
Before

left side hit a phone booth...

right still good

third tail with the LED third above it

comparison shot with old third

with new third

all three done in the day

at night

i also put in LED blinkers and reverse lights
reverse in the day

at night

blinkers in the day

at night

 

I put my body lift on, on 3-18,
PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!! PM or Email me with questions or comments.
Before





after





A quick write up with a few pictures,
Take all door Trim pieces of, 5 screws in the rear hatch 2 on each back door and 4 on the front two doors.

lift the carpet and there will be black caps that can be popped out which are hiding the bolt heads, one by the drivers left foot, one right behind left side of the drivers seat, one right inside the back door, then one underneath the cargo area quarter panel plastic.. and its the same on the passenger side. then there are two behind the front bumper.


in the rear


do one side at a time, unbolt all five bolts from oneside, put a block under the pinch weld of that side jack it up and put in the spacers, put the new bolts in, and then on to the other side.


EDIT: I have fender well covers to cover the gap in the rear and will put up pictures when i do it.

PLEASE FOLLOW POST RULES AND DO NOT POST IN THIS THREAD. PM ME WITH ANY QUESTIONS COMMENTS OR CONCERNS!!! PM or Email me with questions or comments.

 

Heres the write up on my Guage cluster LED INSTALL

And here is the write up on my Temperatur control LED conversion

 

Heres whats coming this weekend, they need to be sanded and painted then welded on.

 

Some Flexy Shots


My Wife Justine and I


Flex Ramp Shots,

 

Newest addition, I bypassed the stock transmission cooler and put in ths LPD 4474 cooler. Didnt take pictures of the hose re routing but its tucked up by the radiator so it cant get snagged on anything. But this is where i mounted it, itll be here for a while, im contemplating putting it on the skid plate when i get a chance to make one. But who knows. Heres the only pic i have of it.

 

04-15-09 Goodyear Wrangler MT R 285/75R16

 

Well, while out buying a trailer this weekend my baby broke 100k.



And here is my new trailer, is going to be sandblasted, painted black, new tires, shocks brakes and maintenance overhaul before i pick it up. Its an M416 1/4 ton army trailer from back in the day.