Fuel line to charcoal canister replacement
07-16-2019, 07:20 PM
#1
Fuel line to charcoal canister replacement
My fuel line (black hose) connected to my charcoal canister in my 1988 pickup needs to be replaced. What size and material hose do I need to buy? I know I can’t use silicone but that’s about all I know! Thanks in advance!!
07-17-2019, 02:55 AM
#2
Registered User
Factory is metric, but 1/4" ID fuel hose fits perfect.
There are a total of four non-pressure fuel hoses on a 22RE (2 at the tank & the other end of these 2 lines that come from the canister & FPR). 7ft of hose is enough to replace all 4 hoses. I bought this 6ft length and ended up being a few inches short and had to order more: https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1).
Any auto parts store should have fuel hose sold by the foot. Just make sure it is fuel rated, don't use vacuum hose.
There are a total of four non-pressure fuel hoses on a 22RE (2 at the tank & the other end of these 2 lines that come from the canister & FPR). 7ft of hose is enough to replace all 4 hoses. I bought this 6ft length and ended up being a few inches short and had to order more: https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1).
Any auto parts store should have fuel hose sold by the foot. Just make sure it is fuel rated, don't use vacuum hose.
Last edited by Paul22RE; 07-17-2019 at 10:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post
too_cool_3
86-95 Trucks & 4Runners
10
11-06-2021 07:42 PM
4Runner777
95.5-2004 Tacomas & 96-2002 4Runners
4
09-15-2016 04:46 AM
