Pre 84 Trucks 1st gen pickups

Parking brake bell crank???

Thread Tools
 
Search this Thread
 
Old 05-24-2018, 02:38 AM
  #1  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
Parking brake bell crank???

I want to get my emergency brake back. My mechanic says that I need a 'parking brake bell-crank'.
Any leads on one that'll retrofit back to the 1981?
Thanks
Old 05-24-2018, 08:18 AM
  #2  
Registered User
 
jakey poo's Avatar
 
Join Date: Jan 2015
Location: Gaston, OR
Posts: 960
Received 147 Likes on 105 Posts
The one on my '83 looks exactly like the one on my "87 4Runner. I'm sure there are plenty of them from vehicles being parted out. You called always call yodajim and they could send you one
Old 05-24-2018, 11:58 AM
  #3  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by jakey poo
The one on my '83 looks exactly like the one on my "87 4Runner. I'm sure there are plenty of them from vehicles being parted out. You called always call yodajim and they could send you one
Thank you. I can't find him in here as a member? Am I not looking in the right places? It says no such member exists when I search yodajim.
Old 05-24-2018, 12:15 PM
  #4  
Registered User
 
old87yota's Avatar
 
Join Date: Jun 2013
Location: Portland, Oregon, USA
Posts: 3,083
Received 570 Likes on 449 Posts
I am not sure if he is a member here, but he does have a business selling used Toyota Truck parts in Colorado: http://yodajims.com/

Old 05-24-2018, 12:34 PM
  #5  
Registered User
iTrader: (1)
 
wyoming9's Avatar
 
Join Date: Apr 2009
Location: I live in New Tripoli Pa out in the woods
Posts: 13,381
Received 99 Likes on 86 Posts
Red face

Most often the Bell Cranks can be cleaned up

What you need for sure is the Bell crank bracket

What kind of shape arethe cables in??
Old 05-25-2018, 08:10 AM
  #6  
Registered User
 
jakey poo's Avatar
 
Join Date: Jan 2015
Location: Gaston, OR
Posts: 960
Received 147 Likes on 105 Posts
Sorry I normally put a link to his site. Old87Yota linked the guy I was talking about. He has a Toyota salvage yard in Colorado I believe.
Old 05-25-2018, 08:24 AM
  #7  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by wyoming9
Most often the Bell Cranks can be cleaned up

What you need for sure is the Bell crank bracket

What kind of shape arethe cables in??
Cables are a little rusty but ok.
Old 05-25-2018, 11:13 AM
  #8  
Registered User
 
jakey poo's Avatar
 
Join Date: Jan 2015
Location: Gaston, OR
Posts: 960
Received 147 Likes on 105 Posts
That picture makes me glad I live in Oregon. Looks like mostly surface rust, I bet those'll clean right up
Old 05-26-2018, 03:38 AM
  #9  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by jakey poo
That picture makes me glad I live in Oregon. Looks like mostly surface rust, I bet those'll clean right up
You don't get rust in Oregon? lol

Yea, I think they probably would. It's at the mechanics, I'm not doing it myself. I'm just trying to find these parts for him. I need that emergency brake back working now.

I have called, left messages and sent an email to Jim's Toyota. No reply back.
Old 05-26-2018, 11:12 AM
  #10  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
In case he doesn't get back to me, any other suggestions on where to find one?

Would THIS fit? It's for a land cruiser
https://www.ebay.com/itm/Toyota-OEM-...-/261917587984

Last edited by yotantn; 05-26-2018 at 11:16 AM.
Old 05-29-2018, 03:36 AM
  #11  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
Any ideas???
Old 05-29-2018, 07:28 AM
  #12  
Registered User
 
jakey poo's Avatar
 
Join Date: Jan 2015
Location: Gaston, OR
Posts: 960
Received 147 Likes on 105 Posts
Have you tried rockauto.com? JIm's should get back to you. Its a business so I'd assume they were closed for the holiday weekend
Old 06-05-2018, 02:36 PM
  #13  
Registered User
 
Old83@pincher's Avatar
 
Join Date: Jan 2016
Location: Where Prairie meets Mountians
Posts: 221
Received 37 Likes on 33 Posts
Last ditch effort a good fab shop with a laser cutter could make those pieces and a machine shop can make the pivot block. The rest of the parts you should be able to get a various industrial suppliers.
Old 06-10-2018, 04:02 AM
  #14  
Registered User
Thread Starter
 
yotantn's Avatar
 
Join Date: May 2012
Location: Jackson, TN
Posts: 396
Likes: 0
Received 2 Likes on 2 Posts
Thanks for the replies. Finally gave up and they took the old ones off, cleaned up and reworked em. Supposed to get it back soon.
HUNDREDS of dollars in labor,
I hate that but it is what it is. I have to have an emergency brake. Never felt good about getting out of her and letting her sit unless it's on a 100% flat ground. I ended up chocking the back tires every time I got out unless it was in my garage.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CanRunner
95.5-2004 Tacomas & 96-2002 4Runners
6
07-20-2015 01:29 PM
terminator
Items Wanted
5
05-13-2013 04:15 AM
hermyboy3000
86-95 Trucks & 4Runners
16
08-19-2012 12:19 AM
CainISAble
93-98 T100s
1
07-22-2009 05:01 PM
flowingmotion
Newbie Tech Section
1
04-15-2009 05:31 AM



Quick Reply: Parking brake bell crank???



All times are GMT -8. The time now is 06:51 AM.