Pre 84 Trucks (Build-Up Section) Post your build-ups here

My obsession

Thread Tools
 
Search this Thread
 
Old 05-18-2018, 04:04 PM
  #1  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
My obsession

Hi y'all I've been lurking here for a number of years and watching builds stealing your cool ideas and I figured it was about time I posted a little of my 4 truck 9 year first gen obsession.

It starts with this picture my dad showed me of him and his 1981 sr5 long bed that he got new it was love at first sight and I set out looking for one just like it.
Old 05-18-2018, 04:11 PM
  #2  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
Some time in 08ish I forget the exact year I found the truck that would take me on many adventures until about 2013 more on that later for now here she is.

Old 05-18-2018, 04:21 PM
  #3  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
I did what any young man would do and started throwing every cent I made at it and doing stuff in the woods with my friends learning a ton as I went about these rugged little rigs.
I added tires and a newer style rim, had the bed lined and my best friends dad and I made a 10 gal in bed fuel tank so we could take long trips into the mountains.

Old 05-18-2018, 05:04 PM
  #4  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
At some point I decided I needed more money for mods and such and joined the Navy. Ended up in San Diego with some of my best friends and kept wheeling and doing what I could to make the truck better.
Sadly in 2012 my baby was stolen. Good news I did get her back, bad news they beat her like a rented mule. New fenders bumper and so so much work on the inside and suddenly I could get back to upgrades and not repairs. Rock sliders an ome lift kit went on and most of the parts for dual t cases were picked up.


The following users liked this post:
swampedout (06-28-2020)
Old 05-19-2018, 06:00 AM
  #5  
Registered User
 
SomedayJ's Avatar
 
Join Date: Jan 2017
Posts: 1,264
Received 331 Likes on 246 Posts
Nice truck!
That photo of your father with the truck looks like those old Toyota ads, I love it.
Old 05-19-2018, 01:06 PM
  #6  
Registered User
 
old87yota's Avatar
 
Join Date: Jun 2013
Location: Portland, Oregon, USA
Posts: 3,082
Received 568 Likes on 448 Posts
Welcome back to the madness!

At first, I thought the picture of your dad with his truck was a Toyota Ad!

Nice truck! I am looking forward to seeing more!

Old 05-22-2018, 07:28 PM
  #7  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
HAHA it totally does look like an old ad I never noticed before I'll tell him he will get a kick out of it. Also thanks.
Old 05-22-2018, 07:57 PM
  #8  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
So here is where the story goes down hill in a very literal sense. In 2014 while on a camping trip in some beautiful hills I went from photo one to photo two when the road I was driving down on the way back to town gave out. Freak accident but it more or less put my baby in a hurt locker. She held together for somewhere around 20 rolls before a rock was nice enough to stop us about 200 yards down. I by the grace of god and the skill of toyota engineers walked away. I payed $80 to buy her back from the insurance company and stuck her in grandpas barn.

The following users liked this post:
swampedout (06-28-2020)
Old 05-22-2018, 08:02 PM
  #9  
Registered User
iTrader: (1)
 
NYHumpinUtah's Avatar
 
Join Date: Dec 2017
Location: Enoch Utah
Posts: 839
Received 75 Likes on 54 Posts
Dude, you walked away from that??? AMAZING you're a lucky man!
Sorry for your loss.
Old 05-22-2018, 08:05 PM
  #10  
Registered User
 
old87yota's Avatar
 
Join Date: Jun 2013
Location: Portland, Oregon, USA
Posts: 3,082
Received 568 Likes on 448 Posts


I am glad you were able to walk away from that!

That must have been a scary experience!

Old 05-22-2018, 08:13 PM
  #11  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
Now I can't leave ya'll fine folks on that so in 2016 after two years looking for a good truck to frankenstein my baby into I found a sweet little 1980 San Diego truck with no rust and all the options I wanted that need a loving home.



The following users liked this post:
faber (09-07-2019)
Old 05-22-2018, 08:16 PM
  #12  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
Yes I am very lucky. And thank you both.
Old 05-23-2018, 02:05 AM
  #13  
Registered User
 
SomedayJ's Avatar
 
Join Date: Jan 2017
Posts: 1,264
Received 331 Likes on 246 Posts
How did you open the door to get out? Gosh! Lucky man. You survived that accident and you found a better truck. Double luck!
Old 05-24-2018, 06:51 PM
  #14  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
There was no way to get the door open I crawled out the window.
Old 05-24-2018, 07:01 PM
  #15  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
The new truck while very nice looking from a distance did need a ton of TLC as you would expect for a truck of its age. I did a ton of work to get the inside cleaned and replaced all the lights and a million other little things. I also began taking all the torn up decals off and most important I had the bed lined so it would stay nice like it was.


The following users liked this post:
faber (09-07-2019)
Old 05-24-2018, 07:07 PM
  #16  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
At the same time I took a trip home and stripped as many good parts off the old truck as I could in a week. The motor had been in good shape and a surprising amount of the parts I had on the truck survived.


Old 05-24-2018, 07:19 PM
  #17  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
Now being as nothing ever goes 100% right on said trip home from San Diego to Oregon the 20R in the new truck started burning a gallon of oil every 45min at speed. As such I started the rebuild of the 22R from the old truck in my garage as soon as I go home.


The following users liked this post:
faber (09-07-2019)
Old 05-24-2018, 07:27 PM
  #18  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
With only blood, sweat, tears and money the motor started to look like a power plant worthy of going into the truck of my dreams.



The following users liked this post:
swampedout (06-28-2020)
Old 05-24-2018, 07:40 PM
  #19  
Registered User
Thread Starter
 
cbr600f31997's Avatar
 
Join Date: Oct 2008
Posts: 51
Likes: 0
Received 12 Likes on 11 Posts
Now I am sure that none of you thought I was ignoring the rest of the truck while I was building myself a new power plant. During the time I was doing that I got the inside cleaned up fairly nice and got new decals put on and shined her up to blind oncoming traffic.



The following users liked this post:
faber (09-07-2019)
Old 05-24-2018, 08:28 PM
  #20  
Registered User
iTrader: (1)
 
NYHumpinUtah's Avatar
 
Join Date: Dec 2017
Location: Enoch Utah
Posts: 839
Received 75 Likes on 54 Posts
Is that the LCE billet wire loom mounted up side down?


Quick Reply: My obsession



All times are GMT -8. The time now is 04:20 PM.