YotaTech Forums - Search Results

Notices
 
Search: Posts Made By: ev13wt
Showing results 1 to 25 of 79
Search took 0.01 seconds.
05-04-2019, 03:01 PM
Replies: 8
Views: 411
Posted By dropzone

set up for flat towing? you have a rear full...

set up for flat towing? you have a rear full float conversion with locking hubs like FROR offers or you have a rear d/s disconnect kit?
if you haven't been removing the rear d/s and don't have...
05-01-2019, 07:59 PM
Replies: 18
Views: 876
Posted By greyheadedguy

I forgot to mention I have had the truck in the...

I forgot to mention I have had the truck in the air while working on it and have spun the wheels. When I spin one wheel forward the other wheel spins the opposite direction. Which as I understand...
04-30-2019, 12:48 PM
Replies: 11
Views: 451
Posted By 881stgen

4Runner slows or jerks when letting off the gas

Hey guys. Tried searching for this issue but it's hard to explain. And anything similar I found was for newer Toyotas, most of which were automatics.

When I drive my 4Runner and let off the gas it...
04-24-2019, 05:36 PM
Replies: 7
Views: 363
Posted By outdoorjunky

Well, this is embarrassing. I found the answers...

Well, this is embarrassing. I found the answers I was looking for in the FSM of all places (*Sigh) my bad for posting.
04-18-2019, 11:31 AM
Replies: 1
Views: 354
Posted By arlindsay1992

All the fittings are a double flare.

All the fittings are a double flare.
04-16-2019, 03:30 PM
Replies: 10
Views: 977
Posted By Melrose 4r

Just did the starter relay mod -wow!

Connected the starter relay to a dedicated 12V 30A fused line per RAD4runnerís instructions and all i can say is WOW!
I was skeptical(doubting Thomas) - i already had rebuilt the solenoid and my...
04-05-2019, 04:26 AM
Replies: 11
Views: 838
Posted By Dbaker91

Donít have a sun roof. I checked the AC drain and...

Donít have a sun roof. I checked the AC drain and it was clear. Iím waiting on windshield trim to be shipped then Iím going to have new windshield and gasket put in. Iíll look for your posts. Thanks!
03-29-2019, 08:18 PM
Replies: 6
Views: 569
Posted By scope103

The first thing to check with inconsistent idle...

The first thing to check with inconsistent idle is whether the throttle plate is closing. Easy enough; whenever you think it's idling "too" fast, pop the hood and push the throttle closed with your...
03-29-2019, 02:32 PM
Replies: 11
Views: 555
Posted By Erich Stein

I found this video. $20 trip to horrible freight...

I found this video. $20 trip to horrible freight to get an air hammer won't kill me as much as my frustration level does with these jammed, sized and rusted washers designed by the devil.

YouTube...
03-29-2019, 04:28 AM
Replies: 13
Views: 541
Posted By arlindsay1992

tember2, you need to post a picture of what you...

tember2, you need to post a picture of what you have. Your descriptions haven't quite painted a clear picture of what you're looking for.

For others viewing this thread, auto hubs are different...
03-29-2019, 02:27 AM
Replies: 13
Views: 541
Posted By wallytoo

there might be, but the auto hubs on the 1st gen...

there might be, but the auto hubs on the 1st gen are NOT ADD.
03-28-2019, 05:51 PM
Replies: 11
Views: 555
Posted By wallytoo

put the nuts back on the studs to protect the...

put the nuts back on the studs to protect the ends while striking them. you need to hit them pretty hard repeatedly. i place a ball peen hammer flush on the stud & nut, and strike the ball peen...
03-28-2019, 10:32 AM
Replies: 8
Views: 525
Posted By scope103

What Andy A is saying (I think) is that you can...

What Andy A is saying (I think) is that you can stretch/compress the 1/2 shaft with your hands. So if you have two otherwise identical 1/2 shafts, but one is just (say) 25mm longer, try compressing...
03-27-2019, 07:09 PM
Replies: 8
Views: 525
Posted By scope103

This dealer site...

This dealer site...
03-27-2019, 12:35 PM
Replies: 25
Views: 994
Posted By Erich Stein

I can fix this sensor with time consuming precise...

I can fix this sensor with time consuming precise sanitizing. This is possible for me to re-create the circuitry from a potentiometer. It would be nice to have one sitting here to compare readings...
03-26-2019, 12:51 PM
Replies: 16
Views: 792
Posted By HardLuck_Harris

Well itís fixed. The two things that I can say...

Well itís fixed. The two things that I can say that did it. New distributor with new pickups and rebuilt the fan clutch. 6 months of pain and heartache have come to a close.

Thanks for the help if...
03-25-2019, 06:11 AM
Replies: 5
Views: 637
Posted By Discombobulated

https://www.witchhunter.com/ I had mine done...

https://www.witchhunter.com/

I had mine done quite a while ago but they were great:) I do think I ordered the seals new from Toyota and the cost was minimal. They came back to me looking brand new...
03-21-2019, 03:11 PM
Replies: 6
Views: 488
Posted By jubba_bones

Turned out to be the rear U Joint......thank you.

Turned out to be the rear U Joint......thank you.
03-19-2019, 08:21 PM
Replies: 15
Views: 597
Posted By old87yota

I would first check to see if the fuel pump is...

I would first check to see if the fuel pump is running by jumping the Fp to B+ terminals in the Diagnostic Port / Check Connector, then turning the key to the ON position and listen by the tank to...
03-18-2019, 01:32 PM
Replies: 13
Views: 738
Posted By old87yota

Ev13wt, there is no need to post 22R-E specific...

Ev13wt, there is no need to post 22R-E specific information if we are talking about the 3VZ-E engine as it can cause confusion.



What you are experiencing regarding the coolant temperature...
03-15-2019, 07:38 AM
Replies: 4
Views: 383
Posted By snippits

I like the fix! The throttle body side...

I like the fix!

The throttle body side split on mine, and I bought one from Amazon for $15.09 shipped. Fit a 92 pickup with 22RE just fine. The original Toyota hose was hard as a rock.
...
03-15-2019, 05:07 AM
Replies: 4
Views: 383
Posted By roughridn_sob

Intake boot Fix

So while pulling my radiator the other weekend i ripped the rotted boot that goes from the intake pipe to the AFM. I could find an OEM replacement that was readily available so off to home depot I...
03-13-2019, 06:13 AM
Replies: 16,783
Views: 6,136,059
Posted By COMTB

How it currently sits after a full front...

How it currently sits after a full front suspension refresh. It's filthy I apologize but I literally just pulled it outside the tbars have been adjusted again and it's been aligned. Drives like a...
03-12-2019, 12:27 AM
Replies: 20
Views: 2,952
Posted By RAD4Runner

Checking the Charge Light Circuit t Charge Light Fuse

I use the terms "inboard" and "outboard", instead of left/right or passenger/driver side for consistency, no matter which side of the engine compartment you are measuring from, no matter whether...
03-11-2019, 12:54 PM
Replies: 14
Views: 1,007
Posted By Co_94_PU

Exhuast hardware is single use.. The oem studs...

Exhuast hardware is single use.. The oem studs are knurled and the nuts are pinched/staked.

I don't think even red locktite stands up to exhaust temps..

I would change them all, because I hate...
Showing results 1 to 25 of 79
 


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.