881stGenRunner

Im probably gonna have a rear bumper built by a local shop here. Can some of yall post pics of your bumpers to try and give me some ideas? Thanks a lot for any help yall can give me.

Supra 4x4

I can e-mail you some of mine but don't know how to post here and don't know how to resize them. Mines on a 85 Runner with a swing out tire carrier. PM me your e-mail address if you want pics.

4Rocker

Heres a pic of the one I built:



It used to be flush with the body but some dumb girl on a cell phone in an Exploder rear ended me Thats all the damage I took, but the front end of the explorer was totally fubar'd. Guess that means its strong enough!

nmtoy

here are a few of mine. I still need to make supports out to the side wings and add D-ring shackles.





Robb

deathrunner

rockota

here are some pics of my custom one from Adam Ant creations in CA:






It's based on a Marlin Crawler rear bumper. Very nice work; high quality.

Rusty Davis

Thanks guys, I've been wanting to see some pics myself! Even though I have a 2nd gen. ~ custom is custom ~ right? BTW I'm not gonna bother starting another thread, but if anybody has pics of 2nd gen bumpers, post 'em up as well- they're close enough to look roughly the same....that is- unless you consider this thread hijacking- then I digress.

RustBucket

iTrader: (1)

Had "The Mobile Welder" do this one for me

seaflea

shiftless89

Check the link in my sig

4Crawler

iTrader: (3)

Here's mine:


And with the tire carrier:


More info:
http://www.4crawler.com/4x4/ForSale/....shtml#DIYKits

StanBo

Could you guys include the stock you built them with? I am on the fence on building my own bumpers.

4Crawler

iTrader: (3)

Details on the web page, but the main bumper is 2-1/2" square tubing, I used 1/4" wall, but thinner works as well. I like the 2-1/2" tube as it is the same size as a 2" hitch receiver, so makes a nice clean setup for adding receivers to the bumper.

881stGenRunner

RustBucket i really lie how your bumper turned out and that is just about what i was thinking about fabbing up. What is "The Mobile Welder"? All these pics are great keep them coming. Also if people want to post up 2nd gen pics that is cool too.

BLKNBLU

iTrader: (1)

design311

What are the specs of the bumper in these pics, please

seaflea

I'm at work right now, will get you something later tonight. I used to have the drawing for it. Not sure if I still do or not.

seaflea

Here is the link to the build. We made a couple of bumpers that week; starting off with one for a 2nd gen Toy. then mine, it was the prototype for the rest to be made.
https://www.yotatech.com/forums/show...ad+mike+bumper

-TheBandit-

Here's a picture of my rear bumper. I made it out of 2x4x0.120 mild steel.

881stGenRunner

seaflea, mike did a hell of a job on those bumpers, they look really good as well. I also like the mounts on them so it tucks up into the body nicely.