Bandit Runner's 3rd Gen Rear Bumper Build
#65
Registered User
Thread Starter
any updates?
It was very frustrating, because I was really hoping to get it painted, and then do final assembly on Memorial Day weekend. Looks like I'll be a few weeks late on my end date goal.
#69
Registered User
Thread Starter
Finally got all my painting done. I put several light coats of POR-15 TopCoat on the outside of the bumper.
While the topcoats were drying, I also started another project that I've been wanting to do for a while. My undercarriage was getting very ugly with all the rust. So I put 2 coats of POR-15 on the rear frame, cross member, axle, link mounts, panhard bar, etc. Very messy job, but it looks MUCH better, and will hopefully slow down the rust. I still need to do the front half of the truck, but I ran out of paint.
While the topcoats were drying, I also started another project that I've been wanting to do for a while. My undercarriage was getting very ugly with all the rust. So I put 2 coats of POR-15 on the rear frame, cross member, axle, link mounts, panhard bar, etc. Very messy job, but it looks MUCH better, and will hopefully slow down the rust. I still need to do the front half of the truck, but I ran out of paint.
Last edited by Bandit Runner; 07-19-2017 at 06:48 PM.
#76
Registered User
Thread Starter
Looks amazing! What are you gonna build after this?
Man that thing looks terrible! I will give you $200 for it
200 is way too much. i'll give you a hundred bucks lol
#77
Registered User
iTrader: (1)
Haha it was worth a shot right?
But in all seriousness, that bumper looks amazing! Your fab skill and attention to detail never cease to amaze me.
I also noticed that you have a rear cargo storage drawer system. Do you have a build thread for that or do you care to share any details about how you did it by any chance? I have been wanting to make one for a while but I just don't know where to start...
But in all seriousness, that bumper looks amazing! Your fab skill and attention to detail never cease to amaze me.
I also noticed that you have a rear cargo storage drawer system. Do you have a build thread for that or do you care to share any details about how you did it by any chance? I have been wanting to make one for a while but I just don't know where to start...
#78
Registered User
Join Date: Oct 2010
Location: James Island, Charleston, SC
Posts: 44
Received 0 Likes
on
0 Posts
Haha it was worth a shot right?
But in all seriousness, that bumper looks amazing! Your fab skill and attention to detail never cease to amaze me.
I also noticed that you have a rear cargo storage drawer system. Do you have a build thread for that or do you care to share any details about how you did it by any chance? I have been wanting to make one for a while but I just don't know where to start...
But in all seriousness, that bumper looks amazing! Your fab skill and attention to detail never cease to amaze me.
I also noticed that you have a rear cargo storage drawer system. Do you have a build thread for that or do you care to share any details about how you did it by any chance? I have been wanting to make one for a while but I just don't know where to start...
x2 bumper looks awesome.....and I would like to see some details on the cargo drawers too.
#79
Registered User
Thread Starter
Thanks guys. Here is the thread to the cargo box: https://www.yotatech.com/forums/f2/b...go-box-183022/
Its not so much a "build" thread though, more like a "Its done, Here it is" thread. Let me know if you have any specific questions.
Its not so much a "build" thread though, more like a "Its done, Here it is" thread. Let me know if you have any specific questions.
#80
Registered User
it really is great. the only thing i would have done differently is a swing out tire carrier. it's got a professional look to it bandit. hands down one of the best bumpers i've ever seen