63 inchers ?
 

ok i keep hearing about them and even seen a few pics of what they can do. my question is where do i get them( what year chevy's)? and why can't or don't we use them on the front? I'm thinking of getting them but if i can't put a pair on the front what do i put up there?

Dude. Come on. The forums are to get help, yes. You gotta start somewhere I understand, but just how cool would this place be if all the threads we have to look at are people asking about stuff already covered.

You should delete this thread in the FAB section and start one in off topic asking for good links to info. That is after you have already used the blinking SEARCH button.

If you saw my thread on the 63" Chevy Swap posted in this very section, you would see a pic very near the beginning of the thread showing the extreme length of the 63" springs in comparison to stock rear springs. You can't put that crap up front cause there isn't enough frame to mount them too. They are really long.

A common thing to do about the front(on a solid axled toy) is rears up front.

Now I am going to link you to the two best FAQ threads on the net for those two specific projects.
That would be the FAQs on the pirate board.
Rears up front
Chevies

Read every post all the way through. Then you will see the light.

*NOTE*Don't go posting anything like this thread on pirate cause they will spend two or three pages of posts making fun of you and then ban you. Fun for everyone else, no fun for you.

While your in the world of pirate. Take this link to the bookmarks. It is more or less a toyota bible. Any noob question can be found in there using ctrl-f and typing what you need.
Pirate Toyota FAQ

Please don't take this post in a negative way.
I'm just trying to help.
Good luck and post up your progress.