YotaTech Forums - 1986 Toyota Pick-Up 4X4

<<<New Pictures Coming Soon>>>

http://www.tamparacing.com/photopost...m/100_5288.JPG
http://www.tamparacing.com/photopost...m/100_5293.JPG
http://www.tamparacing.com/photopost...m/100_5307.JPG
http://www.tamparacing.com/photopost...m/100_5323.JPG

Current:

1986 Toyota Pick-Up 4X4
stock 22R, G52, & RF1A
4.10:1 gears
106,xxx miles original

Net weight as it sits with a full tank = 3,660 lbs.

Flex-a-lite Black Magic 165 electra-fan

Pro Comp ES3000 gas-celled shocks
Pro Comp ES1000 steering stabilizer

removed factory anti-sway bar for additional flex (HAHAHA)

33x12.50x15 Pro Comp Severe All-Terrains

15x8 (3.75 BS) Pro Comp Rock Crawler Series 51 wheels

Bride black cloth racing bucket seats (slide/recline)

5.56MM ammo box custom center console

PowerTrax Lock-Right Locker by Richmond Gear (rear)

LC Engineering Billet Carb Adaptor w/ K&N Pre-Charger/Dry-Charger Filter

LC Engineering 304 Stainless-Steel Ceramic-Coated Street Pro Header
LC Engineering 304 Stainless-Steel Ceramic-Coated Street Pro Exhaust
(30" Resonator, Magnaflow Turbo Muffler, and 3" Stainless Polished-tip)

Fabtech bed-mount angled spare tire carrier

FuzzBuster Z80 40-channel 2-way CB radio w/ 102" steel whip antenna
(and another Uniden sittting right next to it.....long story)

Explorer Pro Comp Series 55 H3 Halogen off-road spot-lights (clear) (2x)
Explorer Pro Comp Series 55 H3 Halogen off-road flood-lights (yellow) (2x)

Marlin Crawler 300-series Rear Rock-Tube Bumper (w/ pintle hitch & 3.75T Shackles)

Marlin Crawler Front Winch DOM Tube Bumper (w/ relocated turn signals)
^^Currently sitting on side of house with a Galv. pipe Pre-Runner Style light bar in it's place temporarily...

Smittybilt XRC 8,000lb Winch

Bed-mounted 60" Hi-Lift Xtreme Jack (Shovel bungee strapped to it)

Sky Manufacturing driveline parking-brake kit

TechnaFab rear disc-brake conversion & upgraded FZJ80 Master Cylinder

Budbuilt T-case skid plate

Sweet cooler I found on the side of the road (now in bed, in custom welded rack)

Vinyl floor removed and poly-bed coating sprayed down

GlassWorks Unlimited 3" Flare front Fiberglass Fenders (sweet white gel-coat)

Future Plans:

All-Pro Off-Road In-cab Cage Kit
Crow 5-point weld-in racing harness
Roof rack for more lights (can't have enough)
12-Volt Guy dual battery kit with Optima Blue-tops
Yukon Gear 4.88:1 F&R
tube cross-member and 12" Pro Comp MX6 Remote-Reservoir Shocks (rear)

If I wasn't a poor college student:

Yukon full spool and Bobby Long Chromo shafts in rear
Detroit LSD and T100 CV's up front
Total Chaos Gen. 2 full Caddy kit
8" FOA coilovers (front)
Total Chaos rear SUA suspension w/ Deaver F62 leaf springs and 9" Shackles
twin 16" Dirt Logic adjustable shocks out back
SAW 2.5 airbumps on all corners
37x12.50x15 Pro Comp X-terrain's on Hutchinson Rock Monsters (3-piece int. beadlock)
Marlin Crawler Dual Ultimate Transfer Cases
(2.28 Lo in front, 4.7 Lo in back case, 10.716 Double-Lo combined)
FJ80 disc's in front with V6 calipers
fiberglass F&R fender/quarter panels and tubbed bed
full internal 12-point race cage & 5-point harnesses
paint...?