NATO style Jerry cans. New, Never been used
 

Brand New, never been used NATO Jerry cans made to the original and highest specs, measuring 468 x 345 x 165 mm, (18.425” x 13.58” x 6.496”). They hold 20 liters (5.28 gal) of liquids. Fully paint-coated inside and outside, they also have a full, internal breather pipe for splash-proof pouring.
These are the real deal Jerry Can's that WON'T leak no matter what position you store them in, and don’t have that “CARB” compliant crap.
These Can’s are from my personal collection.

$70.00 + Shipping per Jerry Can.

New NATO style spout (high quality flexible steel) sold separately for $9.00 each

These are brand new NATO Style (pre-ban style) Jerry cans, V-mouth, New Seal, holes for locking pin, NATO style fuel can. The Jerry Can is center spline constructed and is designed to withstand a 10 foot drop full of liquid without leaking.
This Jerry Can is NOT the CARB junk compliant model. If you have ever tried to use the CARB type fuel cans, then you'll know what a pain they are to use and how much fuel gets spilled in trying to use them.

This is a BRAND NEW Jerry Can (Manufactured in 2008). I opened the original packaging to verify condition, and then repacked in a stronger box for reshipment.

Locking pins not included but readily available at any hardware store for cheap.

Two Colors to choose from, RAL-1000 or RAL-1024.
This can is special in many ways:
1) The wall thickness is 0.9-1mm instead of the NATO standard 0.8mm
2) The outer paint thickness is min. 60 micron instead of standard 20-40 micron
3) Painted on the inside as well, which means the inner surface will not rust for many years
4) Our inner paint thickness is min. 20 micron
5) This can will resist a 3 meter (about 10 feet) drops full of liquid without leaking.
6) The manufacturer tested to salt water spray and 2 atmospheres pressure successfully and THESE particular NATO Style Jerry Can’s are the ONLY models approve by the Israeli military (The Israeli Military operates in some of the most extreme climate conditions of any military)
7) Powder painted steel jerry cans
8) Powder painting with FAPROXYD 100 resistant to ethylene.
9) Material - pressed steel sheets.
10) Welded on plasma machines.
11) These Jerry Cans are suitable for:
U95, Pb95, Pb98 (Gasoline) and Diesel

Certificates:
1.DIN 7274 by TUV
2.UN Numbers
3.GS/TUV
These certificates are accepted and recognized by all EU countries, they indicate that the product complies with all the rigid and strict safety requirements.
This product complies with international standards and was tested to the highest standards and requirements of the Israeli Military

I’m located in Port Orchard, WA and will ship to anywhere in the US and Canadian Only.

Nice cans!

https://www.yotatech.com/attachment....4&d=1276009975
https://www.yotatech.com/attachment....5&d=1276009975
https://www.yotatech.com/attachment....6&d=1276009975

Thank you for blowing those up for me.
I appreciate it!
Here are more pics

Updated specs and price

I've been asked a couple times about seals for these Jerry cans.
I'm sorry to say I don't have any at this time.

I will however get a hold of the manufacturer to see if I can purchase some to sell will these Jerry Cans.
If it's not too cost prohibitive (shipping from Israel), then I'll go ahead and purchase a lot of them, otherwise I would suggest any seal you can find for the NATO Jerry can will work on these cans. Maybe Wedco might work? That's just a guess and I haven't tried it myself.

I also don't have any extra lids for these.

I hope I answered all the questions.

Thank you very much,

Todd Cole

I talked to the manufacturer and I won't be able to order any gaskets until I place another order of Jerry Cans. The shipping is cost prohibitive, but when I order the Jerry Cans they can throw the seals in with them for no extra shipping charges.
Each seal will be $4 each when I get them.

The Hebrew writing on the side of the mustard colored Jerry cans says, "Mixed Oil".

If there are any more questions, please email me at tjcole12@hotmail.com

Thank you,

Todd Cole

"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!" ~Adolf Hitler, 1935

I'm out of nozzles (replying to emails sent) but have a few Jerry cans left.

Thank you everyone for letting me post here.
FYI my sale history (so you know I'm not a fly-by-night outfit and am just a muscle car enthusiast that wants to share some awesome cans I found) is on www.v8buick.com for over 7 years.

Also I found some nice nozzles if you guys are looking for them.
They are not mine, just trying to help.
http://www.britishpacific.com/BPSite...ans.html#spout

Cheers,

Todd Cole

Well Cole if I had the cash I would buy them from you.Im suprised no one has replied.The fact that u can lay them down and not worry about fumes or leaking is the main selling point for me.

Hello Matt,

I understand. That is one of the big reasons I bought them is for that reason. No leaks or fumes.

Thank you,

Todd

Hi Tjcole,
I am interested in your Nato cans. Do you have, say five available? Can you provide an estimate of shipping to the Denver, Colorado area? New subject: in the early '80's I used to sail around and into Port Orchard and Poulsbo and so on.

Best regards,

trgreen

Hello TRGREEN,

Shipping for 5 NATO Jerry Cans is $32.00

email me at tjcole12@hotmail.com and you can send me your address, etc...

So for 5 Jerry Cans the total shipped to your door would be $380.00
I can do money order, company check or paypal. You decide which ever works best for you.

Cool sailing area around here. I grew up in Bremerton. Lots of fun sailing to all the different waterfront nightclubs.
If you haven't been here since, then you'd hardly recognize it. There are also TWO Narrow bridges now.

So anyways, let me know what you'd like to do.
just email me.

Thank you very much

Todd Cole

How much to ship to 95842

Hello,

Sorry, but I'm currently out.
I do expect more in by the end of Sept.
Please email me towards the end of September and I'll get you a quote. I need to know how many Jerry cans you want and how many nozzles.

Thank you very much,

Todd Cole

Hello 93yotaSR5,

I just received some Jerry Cans yesterday.
I do not have any nozzles yet and may not have them for a few weeks at least.
But here is a site that does have nozzles (a bit more expensive then mine but they are the exact same ones).
http://www.britishpacific.com/BPSite...ans.html#spout

Now these Jerry Cans I just got in are green and are from England, not Israel. But they are exactly the same in every way except for the color. Also when they shipped them to me they did not pack them very well so there is a little scuffing on the sides. But really is not much, just a little.

They are $70.00 each. I just need to know how many you'd like and your address so I can get you a shipping quote.

Please email me at tjcole12@hotmail.com

Thank you very much,

Todd Cole
360.621.1195

Jst looking to get one. My zip code is 95842
I can wait on the nozzle till you get more in.
Thanks

Hello 93yotaSR5,

For one Jerry can to 95842 is $11.00 for shipping.

So the total would be $81.00
I won't have any more nozzles for at least a month if not more.
The manufacturer is behind.
Now the Jerry cans that I have left are British made. not the Israeli ones I mentioned above, but they are still made to the NATO Military specifications.

They are exactly the same as the Israeli ones except they are dark green and the thickness of the steel is the NATO standard .8mm. The Israeli ones were .9mm - 1.0mm in thickness.
These British Cans also come with the locking pin installed.

Here is a site that does have nozzles (a bit more expensive then mine but they are the exact same ones).
http://www.britishpacific.com/BPSite...ans.html#spout

I can do Money Orders, Company Cheques or paypal (tjcole12@hotmail.com for paypal).

Let me know what you'd like to do.

Please email me at tjcole12@hotmail.com.

Thank you very much,

Todd Cole
3757 Briarwood Dr. SE
Port Orchard, WA 98366
360.621.1195

Hey everybody just an update. I recently got in some more Jerry Cans. These cans are a darker green and unlike the cans I have received in the past these come with a locking pin. The dark green cans have passed NATO specks. As always the price per can is $69.

Cheers!

For those who are interested,
I am about to get more Jerry Cans in very soon. I am taking orders now. THe price is $69 each plus shipping. I would be happy to answer any questions.
Cheers

Nato gas cans
 

I would like to order some gas cans. How do I go about this?

up date
 

Just a clarification. The Jerry cans I am getting in now are made in Great Britain not Israel. They are dark green.
Cheers,
Todd Cole