clutch problem
 

so i have a 89 4runner with the 4.3 swap in it , and toyota trany , the clutch will not release when i push the clutch in , it has a new slave , master , i adjusted the push rod to max and still nothing , what could be the problem ?

I have the same problem with my 93 Pickup , i just replaced a new engine, after putting everything back,Clutch won't change gear, so we push the truck and drove while power shifting it shift and runs fine but wont engage if i press the clutch. So i know the problem it's either the pressure plate,clutch or on the throw-out bearing, I'm yet to take it down one more time, and i really don't know what i'm going to do next.