New Heavy Duty Knuckle Gusset Kit coming soon!!
#1
Registered User
Thread Starter
Marlin Crawler's New Heavy Duty Knuckle Gusset Kit coming soon!!
Check out our new heavy duty knuckle gusset kit coming soon!
What separates our new Heavy Duty Knuckle Gusset Kit from the rest?
Full Stop-to-Stop Bracing
In the past, small add-on plates have been used to cap off the steering stop. We've now integrated the knuckle gusset itself with the steering stops.
Four Braces Instead of Two
In the past we only used single braces on the top and bottom mounted perpendicular to the axle housing. Our new design features four braces to better spread the load and increase load rating.
Angled Bottom Edge
The sharp edges of the old single perpendicular-mounted bottom brace were just crying for attention from rocks. Our new heavy duty design ramps the two bottom braces with a rounded edge for better functionality + strength.
UPDATE: Full Knuckle-to-Spring Support
The upper plates extend to the spring perch where they are welded for full leaf spring to knuckle support!
UPDATE: Compatible with Coil Over & Air Shocks
We've left enough room to fit common coil over and air shocks to the upper gusset.
Made In The USA with High Quality USA Steel
We are a long-time supporter of Made In USA with high quality and long lasting USA steel. We use the very same high quality USA steel as before!
So what do you guys think? We will be releasing these very soon! More pictures and install instructions to follow!
BigMike
What separates our new Heavy Duty Knuckle Gusset Kit from the rest?
Full Stop-to-Stop Bracing
In the past, small add-on plates have been used to cap off the steering stop. We've now integrated the knuckle gusset itself with the steering stops.
Four Braces Instead of Two
In the past we only used single braces on the top and bottom mounted perpendicular to the axle housing. Our new design features four braces to better spread the load and increase load rating.
Angled Bottom Edge
The sharp edges of the old single perpendicular-mounted bottom brace were just crying for attention from rocks. Our new heavy duty design ramps the two bottom braces with a rounded edge for better functionality + strength.
UPDATE: Full Knuckle-to-Spring Support
The upper plates extend to the spring perch where they are welded for full leaf spring to knuckle support!
UPDATE: Compatible with Coil Over & Air Shocks
We've left enough room to fit common coil over and air shocks to the upper gusset.
Made In The USA with High Quality USA Steel
We are a long-time supporter of Made In USA with high quality and long lasting USA steel. We use the very same high quality USA steel as before!
So what do you guys think? We will be releasing these very soon! More pictures and install instructions to follow!
BigMike
Last edited by BigMike; 04-26-2012 at 06:20 PM.
#2
Registered User
Thread Starter
Updates,
-The top gussets extend out to the spring perches where they are welded for full knuckle-to-spring support.
-Compatible with Coil Over & Air Shocks
-We've created a Product Page for this where you can use the Notify button to be automatically notified by email once these babies are released - Click here: Heavy Duty Knuckle Gusset Kit | Marlin Crawler, Inc.
-We will have our first prototype on display this weekend at the Tin Bender's Jamboree.
Here are some sneak peeks of the prototypes being installed onto our display axle. Stop by our new red booth tomorrow and Saturday to check em out!
Regards,
BigMike
-The top gussets extend out to the spring perches where they are welded for full knuckle-to-spring support.
-Compatible with Coil Over & Air Shocks
-We've created a Product Page for this where you can use the Notify button to be automatically notified by email once these babies are released - Click here: Heavy Duty Knuckle Gusset Kit | Marlin Crawler, Inc.
-We will have our first prototype on display this weekend at the Tin Bender's Jamboree.
Here are some sneak peeks of the prototypes being installed onto our display axle. Stop by our new red booth tomorrow and Saturday to check em out!
Regards,
BigMike
#3
Registered User
Join Date: Nov 2008
Location: brooks alberta canada
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
my axle is all tore apart for a rebuild, would love a set of these to put it together with. there so much nicer then the others. how soon till there available...... a week?, a month?
Trending Topics
#10
Registered User
Thread Starter
NOW TAKING PRE-ORDERS on our new HD Knuckle Gusset Kit!
Production was delayed for a few redesigns, but we are now pleased to announce we will ship out the first units next Thursday (8/2)!
We are featuring an Introductory Price for the initial units that we'll have in stock next week. Don't miss out -- Pre-order today!
Please click here for more info on this badass product: http://www.marlincrawler.com/axle/fr...kle-gusset-kit
Regards,
BigMike
Production was delayed for a few redesigns, but we are now pleased to announce we will ship out the first units next Thursday (8/2)!
We are featuring an Introductory Price for the initial units that we'll have in stock next week. Don't miss out -- Pre-order today!
Please click here for more info on this badass product: http://www.marlincrawler.com/axle/fr...kle-gusset-kit
Regards,
BigMike
#11
Registered User
Thread Starter
Update on this!
We've already shipped out our first 50 sets! This kit is really awesome and we are really glad to help improve the strength of your axle.
Here is what the final kit looks like. We will be shipping out more kits soon!
We've already shipped out our first 50 sets! This kit is really awesome and we are really glad to help improve the strength of your axle.
Here is what the final kit looks like. We will be shipping out more kits soon!
Last edited by BigMike; 08-13-2012 at 02:17 PM.
#13
Registered User
Thread Starter
We'll be MIG'ing them when we do installs, but flux'ing or TIG'ing would work also. These are close up shots and the gaps are not as large as they seem: They are perfect to lay down a nice penetrating MIG bead.
BigMike
BigMike
#16
Registered User
Thread Starter
Hey guys! We have an awesome update to this!
We are now including a pair of Steering Stop Inserts to beef'n up the steering stop for maximum strength.
Here is what the updated complete kit looks like:
And here is where the Steering Stop Inserts go. Simply drop and weld em in place before putting the top braces on:
Best of all, we are including these at no extra cost! What do you guys think?!
BigMike
We are now including a pair of Steering Stop Inserts to beef'n up the steering stop for maximum strength.
Here is what the updated complete kit looks like:
And here is where the Steering Stop Inserts go. Simply drop and weld em in place before putting the top braces on:
Best of all, we are including these at no extra cost! What do you guys think?!
BigMike
Last edited by BigMike; 11-15-2012 at 03:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
XtraCab
Solid Axle Swaps, All Years
18
04-12-2020 05:25 AM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM