Thread size for slave cylinder bolts?
Would anyone happen to know the thread size for the two bolts for the slave cylinder? I have no way to get to the nearest dealership (45 mins away) and need to match the bolts from a local fastener shop in town. I know it's a 12mm head, but I don't know what kind of threading.
|
In case this info might be helpful to someone in the future, the bolt size is 8mm x 1.25 x 20mm. The local fastener shop doesn't carry many bolts with a fine pitch like 1.25, but I found that the bolts for the front skid plate were the same size...and I just happened to have extras when I ordered them last.
=) Moral of the story, it's always a good thing to order extra bolts/nuts/etc. for a few extra bucks. It saved my butt this time! |
Better yet to have a bolt bin with JIS bolts
It is nice to not have to worry about reusing old rusted and rounded off hardware. |
All times are GMT -8. The time now is 12:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands