goez211

Does anyone know how long the stock rear shocks (compressed and extended) are on the '02 4Runner. Specifically a 4x4 SR5, if it matters.

eric-the-red

No, but I have a used set in my garage. I'll try and remember to measure them tonight, stay tuned.

desertcamper67

12.375"X20"
http://www.monroe.com/catalog/docume...engthSheet.pdf

Page 8 part #32334 is the shock for your truck

This spec sheet comes in real handy when fitting shocks to altered or moved mounts and lifted or lowered suspensions.

eric-the-red

I get 12.375" compressed and 19.375" extended. Those are off an 01 4Runner so they should be exactly the same as your 02.

goez211

cool, thx, that is good info to have. i was also looking for the actual measurements of an OEM shock taken off a truck as I need to see if they differ from the aftermarket shocks at all. It seems I could have been more specific in the orig question, but again, thanks for the info, it'll come in handy.

Eric - Thanks! That is exactly what I needed to know.

I've been trying to figure out if the KYB MonoMax shocks I had put on a while back differ from stock at all in actual compressed/extended lengths. If anyone is curious, here's a longer version of the story: https://www.yotatech.com/forums/f2/r...o-long-185685/