New Project in progress - skid plates...
 

Picked up a set of Rockstomper skids off Ebay for $40 + $56 shipping. Not a bad deal at all :bigok:
They were a little rusty. But a little work and some bedliner and they'll look good as new.

A little rusty:
http://www.haveblueonline.com/skids/P1010011_small.JPG

Rust removed:

http://www.haveblueonline.com/skids/P1010012_small.JPG

Rost coverter applied:
http://www.haveblueonline.com/skids/P1010015_small.JPG

Tomorrow night I will apply the bedliner and post more pics.

Right on Alan, you are going crazy on that Runner! Keep it up.

looks sweet im excited to see final product

Yup! Having lots of fun with it!

Got the Herculiner applied and the skid mounted. Had to cut a seized bolt to get the old tin foil skid off. So, for now I only have 2 bolts holding it in place up front and two in back.

http://www.haveblueonline.com/skids/P1008062_small.JPG

so does this mean your gonna start wheeling again ? :D

and "great find" i never thought about looking on fleebay for skids :great:

Actually I was going to go today. Then it snowed in the mountains. :cry:

awe whats a little snow ? :hillbill:
Im jealous of that skid find on ebay,,, :cry:

Do you know how thick is that skid is?

3/16"

I still need to refinish the transfer case skid. That'll be next weekend's project.

just out of curiousity is 3/16 average thickness? I'm planning to just fab one up one of these days. Thanks, truck is lookin gooood

Thanks for the compliment!

It looks like one long sheet of 3/16 that's been bent in 4 places and reinforced with angle iron.

Yes, 3/16" is pretty much the standard. 1/8" is what the stock skid is I think, and 1/4" is just overkill.

i'm debating just reinforcing the stock plate with some angle iron, mine isn't bent or mangled at all.

Actually i believe the stock skid is 1/16" ...i'm getting a custom 1/8" Budbuilt skid next week.

Dude, wheel it til you break it then fab a new one.

I was thinkin bout just goin till it breaks but i just don't want it to break and let what ever broke it travel further into the car and break something else. if that makes sense lol.

Alan, IIRC the Rock Stomper Skids are only 11 ga, which translates to about 1/8". When sold by Rock Stomper, this was actually one of their selling features. The fact that the skid would bend and not transfer the energy of the impact to the frame.

I agree the stock skid is very thin, definately not 1/8". The custom 1/8" should be good if reinforced.

I have been running an 11 ga (1/8") "Arizona Made" skid and 1/8" belly pan for about 3 years now. It has been wheeled hard, dented, and pounded out several times. It has not let me down.

I think either 1/8" reinforced or 3/16" is the way to go if you plan to wheel hard.

Sounds like a plan, I'll pull my old one off and go from there. I'm not a big fan of how that rockstomper plate looks...to square for my liking lol. Thanks for the help...
haveblue-sorry for the thread steal didn't mean to!