Kevin Scored 3.4L Headers!
 

I hate trd prices i hate jba,downey and vice versa but hey i got these for a good deal. Whats steps should i take for prepping install. Now i need to find a guy to do them for me. Will offer $250 for the work to do it!! :bigok: :bigok: :bigok:

Patience! From what I read...

I hope my 2 cats dont interfere. I know this is not intended for obdII 3.4l trucks but. I'll make do somehow!!. I wonder if they carry ceramic coating in a rattlecan ill hit it with couple of layers! :bigok:

bump 49views?

Speaking of cats i got a cherry bomb where my cat was. Sounds pretty good.

On a 3rd gen? c-bomb in place of cat? illegal? hehe

No thermal coating in a rattle can, sorry. There is thermal coating that is matte black in finish though, that's what i got on my headers. The other issue in my eyes is the welds around the inside of the primary tubes on the flange. Big restriction. I had mine welded up around the outside then ground the inside smooth. You will just love putting the nuts on the studs with these headers.... I cut my studs down. So far, 7K miles and no leaks though.

If they don't fit your 4Runner, let me know..I might be willing to buy them from you. Get them coated before you do anything!

U got it ill just have to find cans of this thermal coating. I dont know neil about letting go. Im a penny pincher and id really would like to get this to work. But i'll still let you know.

Thermal coating has to be applied by a shop. Not a home application thing unless you have the know-how and the correct equipment and material, which is not available in a rattle can. If you find it in a rattle can, it's not the right stuff and don't waste your money.

Darn, guess HPC has my business.

Heres a pic of it. Stripped of the paint and hi temp ceramic paint rated at 1500f. Judging that i need the egr port welded to be blocked off and the cross over connection to be welded im really skeptical on my decision of keeping them. The bilsteins and addco combo looks like more of a worthwhile upgrade =- /.


http://webpages.charter.net/kevin444/headers2.JPG

Found an page on edelbrock headers installed on a 1996 4runner limited, 4x4

http://www.disknet.com/ExideC/header_installation.htm

kevin,

this was one of the writeups that i was talking about today w/ you. as you've read too, the quality is not as good as trd (but still usable) and the install is a mutha. the thing that seems oddly out of place is his comment about the neck snapping accelleration. this is the only writeup or opinion that ive ever read where someone described it as such.

you know what i'm gonna say, so i wont repeat it :)

bob

Alright guys. On superbowl sunday and 2 buddies of mines who decided to tackle it. Well the damn 2nd cat will be in-compatible with my truck. So we aborted! $300 shipped gets it. On the plus side i made a egr block out plate to block off the egr port on the driver side headers. Sooo yeah pm me if interested. Looks like bilstein will go on there!

I'll give you $1 shipped.

J/K :hillbill:

headers
 

I'm interested if it's still available. Let me know.

Thanks,

Mike

I did the cherry bomb in place of the cat, bad idea. Combine it with 3 inch piping and a flow master 40=very loud. I would pass buy on the freeway, and my friends could hear me comming for more than a mile away. As for the headers, where is the cheapest place to buy them? And why does downey not recomend it for the 4runners with body lifts.