HID retro #2 in Tacoma using Acura TL's lots of PICS
#1
Contributing Member
Thread Starter
HID retro #2 in Tacoma using Acura TL's lots of PICS
i had done a previous retro with E46 bixenons out of a BMW, they were ok, but i craved more, anyway on to the pics. (my old retro thread is here: https://www.yotatech.com/forums/f2/hid-retrofit-completed-95631/)
cutoff at about 10-12 feet
color along cutoff line at about 25 feet away
high beam at 25 feet
hid's and fog
color at cutoff
under cutoff
cutoff along wall
output pic, note: the yellow color is because my fog lights are on
comments are welcome!
cutoff at about 10-12 feet
color along cutoff line at about 25 feet away
high beam at 25 feet
hid's and fog
color at cutoff
under cutoff
cutoff along wall
output pic, note: the yellow color is because my fog lights are on
comments are welcome!
#5
Contributing Member
Thread Starter
#6
Contributing Member
Thread Starter
#7
very nice. like most people, i wish i had the cash to do this very nice, effective and safe mod. how'd you go about aiming these projectors when you were mounting them in the housing? was it a pita to wire up the high beam solenoid things?
Trending Topics
#9
Contributing Member
Join Date: Jul 2002
Location: Colorado
Posts: 2,657
Likes: 0
Received 0 Likes
on
0 Posts
Very nice. I was going to upgrade to HID in my projectors but opted to spend the money on gears, locker, and wheels. Now that's I'm driving to work at the butt-crack of dawn, I'm wishing my projectors were HID.
#11
Contributing Member
Thread Starter
yes, i know, but because these dont glare any more than my stock halogens I'm not worried about attracting cops, if i had a PNP hid kit, well that would be a different story
#12
Contributing Member
Thread Starter
i temporally mounted them to the halogen reflector, i then installed them in the truck with the front lens of the headlight removed, and just adjusted them until i was happy, then i took them out, and hot glued them in there, i used hot glue because of its strength and sealing abilities, the high beam on the TL projectors are easy, one wire goes to ground, the other goes the the 12v high beam wire from the stock harness
Thread
Thread Starter
Forum
Replies
Last Post
Regency
General Electrical & Lighting Related Topics
20
01-03-2020 07:43 PM
FS[PacNorWest]: 1987 Toyota 4Runner $1800 Whidbey Island, WA
coreyedwards7611
Vehicles - Trailers (Complete)
4
01-16-2016 06:38 PM
DrZero
General Vehicle Related Topics (Non Year Related)
18
07-24-2015 11:31 PM
WTB[PacNorWest]: WTB - Tacoma/4runner 3.4 Charcoal canister and igniter
94whiterunner
Items Wanted
0
07-12-2015 07:15 PM