Fitting 2nd gen arb bumper on 3rd gen?
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: SINY
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Fitting 2nd gen arb bumper on 3rd gen?
anyone ever try to fit a 2nd gen arb bumper on a 3rd gen. If its just a matter of fabbing new mounts...im game. Anyone ever try it?
#5
Registered User
Join Date: Oct 2006
Location: Christiansburg, VA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
I modified a 2nd gen TJM to fit a 3rd gen
https://www.yotatech.com/forums/f2/2...runner-186040/
It was easier than than fabricating from scratch, but still alot of work.
https://www.yotatech.com/forums/f2/2...runner-186040/
It was easier than than fabricating from scratch, but still alot of work.
#7
Registered User
Thread Starter
Join Date: Dec 2007
Location: SINY
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
After looking into this closer, I realized that the center hoop and the headlamp guards would be all off... Still haven't decided if fabbing one up myself is worth the time spent on it...Guess I'll start the rear bumper this weekend and see how long that takes.
Trending Topics
#9
Registered User
Join Date: Nov 2005
Location: SouthWest Littleton, Colorado
Posts: 1,205
Likes: 0
Received 1 Like
on
1 Post
I have built both a front and rear bumper for my 4runner. The front was simple compared to the rear.
My front took a couple of days.
The rear... I started it a few years ago. Got the main back and sides done in a couple of days. I just re-started to finish it. I just spent 2 full days on it and should finish it today. I also built a tire carrier while I was at it.
My front took a couple of days.
The rear... I started it a few years ago. Got the main back and sides done in a couple of days. I just re-started to finish it. I just spent 2 full days on it and should finish it today. I also built a tire carrier while I was at it.
Last edited by Gerdo; 12-03-2009 at 07:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 10:00 AM