Dead Hatch Struts
What's anyone using these days? At $177 each for OEM I am ready to explore aftermarket options.
|
I don't know, my originals work fine on both rigs, 20-22 years later and at -30*C, I realize its not a Lower Ball joint but you get my point. Aftermarket stuff is hit and miss, usually a miss on a 100Lb tailgate(guessing)
|
I put a pair of StrongArm 6815 on 2 years ago, $44 for the pair. More lifting force over the oe. As in unlatch the hatch and stand back as it opens itself.
So far they aren't showing any sign of weakening, we'll see. I doubt they'll last as the oe did, but was getting tired of getting bonked in the head when it gets cold so I am giving these a go. Time will tell. If you want something a little less- aggressive- when it opens there is an oe-similar version too. |
I'll check em out. Thanks.
|
Originally Posted by habanero
(Post 52415768)
I put a pair of StrongArm 6815 on 2 years ago, $44 for the pair. More lifting force over the oe. As in unlatch the hatch and stand back as it opens itself.
So far they aren't showing any sign of weakening, we'll see. I doubt they'll last as the oe did, but was getting tired of getting bonked in the head when it gets cold so I am giving these a go. Time will tell. If you want something a little less- aggressive- when it opens there is an oe-similar version too. |
I think I'll try an aftermarket set and see how it pans out. If its a success I'll post results.
|
All times are GMT -8. The time now is 05:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands