TStango

I just got a set of Piaa 520's fog from Mike and I plan to install tonight. Does anyone have any suggestions on which wire I should tap into to relay the on/off switch and where is the best place to do so? I would prefer an ignition hot wire rather than limiting myself to usage of the Piaa's only when the low beam headlights are on. Thanks!

Corey

iTrader: (1)

See my write-up in the Tech section under Electrical.

You CAN have total control over your aux. lights.
No need to wire it the way the light makers want you to.

Tacoma Dude

I've got some 520s that I installed using Corey's write-up.
VERY handy

TDiddy

And I followed it when wiring up my Hella's!

Tacoma Dude

Tom, everytime I see your avatar I'm thinking it looks so redundant. Just figured out why - this is what I keep seeing.

TDiddy

Where'd that one come from, did you make one earlier? David did the CA one this morning I think.

Tacoma Dude

no, did it just now...

TDiddy

Ohhh, OK..

Tacoma Dude

TStango

Thanks Corey. That write up gave me some good ideas.

Corey

iTrader: (1)

You are welcome.

You might try the aux. fuse box mod later too if you anticipate tapping into more things.

It sure cleaned up my in cab fuse box, and makes it easier to tap for future mods.

keisur

And it got me back on the right track when installing my LightForce 170's.

keisur

Personally, I like my rendition. It seems to fit the "hello's" I get here in the wonderful city of Houston:

http://home.houston.rr.com/keisur/untitled[1].jpg

TDiddy

Nice keisur, good one!

keisur

I try.