Attention 4 door Taconian's looking for sliderz
#1
Attention 4 door Taconian's looking for sliderz
Some of you have probably seen my posts on the bumpers that Badland Bumpers is now making for the Tacos.
I took some pics there a month ago.
http://www.pnw4runners.net/badland_b...2/DSC00046.jpg
http://www.pnw4runners.net/badland_b...2/DSC00049.jpg
http://www.pnw4runners.net/badland_b...2/DSC00051.jpg
http://www.pnw4runners.net/badland_b...2/DSC00055.jpg
http://www.pnw4runners.net/badland_b...2/DSC00069.jpg
I was just on Jeff's site, and he now has pics up of his wife's 4 door Taco with the loooooooong sliderz on them.
http://www.badlandbumpers.com/index_files/page0002.htm
They look nice on there. If I get back out that way again, I'll try to get some real close-up shots.
Carol's are Rynolined like her front & rear bumpers, but Jeff can also get them powder coated for you from the same guy that did mine a month ago, or he can ship them bare and you can rattle can them.
I took some pics there a month ago.
http://www.pnw4runners.net/badland_b...2/DSC00046.jpg
http://www.pnw4runners.net/badland_b...2/DSC00049.jpg
http://www.pnw4runners.net/badland_b...2/DSC00051.jpg
http://www.pnw4runners.net/badland_b...2/DSC00055.jpg
http://www.pnw4runners.net/badland_b...2/DSC00069.jpg
I was just on Jeff's site, and he now has pics up of his wife's 4 door Taco with the loooooooong sliderz on them.
http://www.badlandbumpers.com/index_files/page0002.htm
They look nice on there. If I get back out that way again, I'll try to get some real close-up shots.
Carol's are Rynolined like her front & rear bumpers, but Jeff can also get them powder coated for you from the same guy that did mine a month ago, or he can ship them bare and you can rattle can them.
#3
Noel, in the new pics on his site, Carol has new tires & wheels on.
They were not on a month ago when I took the pics.
I have no idea how much they would cost.
He could build them like mine where he welds on tubes first, then your sliderz slip in, but he only likes to do it that way if you are there.
It's harder to line them up unless he does it.
I would just get the weld on type.
I don't know. Drop him an email or phone call and ask.
I like the way mine come off.
I and a neighbor both pulled on mine and they slipped out of the three tubes.
Then I dropped them off at Jeff's and he sent them out to be powder coated.
Much easier than having to break a weld.
If you have his source powder coat them, firgure about $40 to $50 more.
I'd get them powder coated, I am really pleased with how mine turned out.
http://www.toyotaoffroad.net/tando/s...ed/slider1.jpg
http://www.toyotaoffroad.net/tando/s...ed/slider5.jpg
Corey
They were not on a month ago when I took the pics.
I have no idea how much they would cost.
He could build them like mine where he welds on tubes first, then your sliderz slip in, but he only likes to do it that way if you are there.
It's harder to line them up unless he does it.
I would just get the weld on type.
I don't know. Drop him an email or phone call and ask.
I like the way mine come off.
I and a neighbor both pulled on mine and they slipped out of the three tubes.
Then I dropped them off at Jeff's and he sent them out to be powder coated.
Much easier than having to break a weld.
If you have his source powder coat them, firgure about $40 to $50 more.
I'd get them powder coated, I am really pleased with how mine turned out.
http://www.toyotaoffroad.net/tando/s...ed/slider1.jpg
http://www.toyotaoffroad.net/tando/s...ed/slider5.jpg
Corey
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
live4soccer7
84-85 Trucks & 4Runners
3
05-11-2016 06:52 PM
Odin
86-95 Trucks & 4Runners
3
09-26-2015 06:56 PM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM