airrikk17

current set up is 95 4runner w/4inch superlift ,
im thinking about purchasing some series 97 rockcrawlers , but im not sure which b.s.ing to get or wheel width.
my choices are 15x10 w/ 4.5 bsing w/ 33x12.5x15 or 15x8 w/4.5 bsing and 33x12.5x15.

my untimate goal is too reduce tire over hang outside the body of the truck , i realize that i wont eliminate it completely , but i need to reduce it as much as possible , then get some fender flares to cover the rest.


currently i have about a hands width of tire hanging out , id like to get it to around an inch or 2.
pics would be extremely helpful. if its easier to email me pics then posting here , mail me at airrikk17@hotmail.com

thanks for the help.

airrikk17

91Toyota4x4

Most of those lifts require 3.5 inches or less.

sutlTL

If I remember correctly Superlift was the only manufacturer that could run more than 3.5" backspacing. But I may be wrong. Contact Superlift and ask them. BTW, I'm running 15 x 10's with 5" backspacing and 32 x 11.50 BFG's with no problems.

Flamedx4

https://www.yotatech.com/forums/f2/correct-backspacing-lifted-4runners-56534/