Anyone run 285's on 17" tundra wheels
03-01-2014, 08:23 AM
#1
Registered User
Thread Starter
Join Date: Sep 2011
Location: Stafford,VA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Anyone run 285's on 17" tundra wheels
Wanna run them when I do the 3" lift, just think I might need a 1" spacer. The BS is 4 3/4 or 5", can't really remember. I was thinking they might rub the UCA's without it. Any opinions???
03-01-2014, 06:24 PM
#2
If the 17" Tundra wheels have a +15 offset, then it is the same as the stock N185L 4Runner wheels. Rubbing on the UCAs will be dependent on the tires you'll be running. Different tire brands have varying tire section widths even if they're of the same size. so best if you do a trial fit first.
03-03-2014, 05:40 AM
#3
Registered User
Join Date: Apr 2006
Location: Salem, Oregon
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
I run 285/70R17 with the Tundra wheels and I do use a spacer although it is just a 1/4inch (not the thread on type). Without the spacer you will rub on the UCA when flexing.
03-03-2014, 07:12 AM
#4
Registered User
Thread Starter
Join Date: Sep 2011
Location: Stafford,VA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM
Suprarossa
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
0
07-06-2015 05:21 AM
