4 the Hard Way

My '94 Toyota extra cab PU (3.0 V6 5 sp.) was totalled on 8/20/03. I rear-ended a dump truck on my way to work. You can see pics of it here: PICS OF TRUCK AFTER THE ACCIDENT ...And no you don't need to sign up to view the album, just click on the pic of the truck...it will open.

All of the damage is front end, frame specifically. Everything on this truck must go...cab, bed, doors, interior, motor, trans, axles, steering box, lockers, lift, everything. There are some things already spoken for like the cap, but it is first come, first served.

The truck will be parted out in PA right off Rt. 80. Buyer is to pay for any and all shipping charges, or pick up parts in NEPA.

E-mails ONLY please to: Greg's e-mail

Thanks.

Greg

My homepage

mycotopian

just curious how did you happen to miss a dump truck coming at you?

AgRunner06

Why does it seem like everyone has hubs for sale right after I bought mine?

KING

.

4 the Hard Way

This is where the truck is at now: http://www.ofoto.com/ViewPhotos.jsp?...it&rnd=3338554

This is what is still available:

1. Cab
2. Bed
3. Doors
4. Trans
5. T-case
6. Rims
7. Tires
8. Gas tank
9. Master cylinder
10. Drive shafts
11. Dash
12. Digital clock
13. Misc. interior pieces
14. Tilt column with wheel
15. PS pump
16. IFS steering box
17. Alternator
18. Starter
19. IFS calipers and rotors
20. NEW parking brake cable
21. Husky floor liners
22. 2” PA body lift with shifters already extended

Please E-mail me if you want anything that is left….

E-MAIL

Thanks.

Greg

4 the Hard Way

BUMP

...and no "tire kickers" please.

Thanks.

Greg

rowan

hey, where you at paragon for the EC4RJ? i think i saw you down there. nice rig... how's the rhino lining on the outside holding up?

4 the Hard Way

Yup I was there in the 4Runner. Thanks, it's not Rhino, it's made by DuPont...not rubber based like Rhino or Hurculiner....more like Line-X, very hard and thin. It's holding up fine. That is the same stuff on the lower half of my totalled PU and that has been on there for over 2 years.

Later.

Greg

Paragon Pics

4 the Hard Way

No one is in the market for 35's even? Wow.

BUMP

Greg

4 the Hard Way

This is what is still available:

1. Cab
2. Bed
3. Doors
4. Trans
5. T-case
6. Rims
7. Tires
8. Gas tank
9. Master cylinder
10. Drive shafts
11. Dash
12. Digital clock
13. Misc. interior pieces
14. Tilt column with wheel
15. PS pump
16. IFS steering box
17. Alternator - SOLD
18. Starter - SOLD
19. IFS calipers and rotors
20. NEW parking brake cable
21. Husky floor liners
22. 2” PA body lift with shifters already extended

Please E-mail me if you want anything that is left….

E-MAIL

Thanks.

Greg

4 the Hard Way

This is what is still available:

1. Cab
2. Bed
3. Doors
4. Trans (5 spd.)
5. T-case
6. Rims (15 x 10)
7. Tires (35’s)
8. Gas tank
9. Master cylinder
10. Drive shafts (CV)
11. Dash
12. Digital clock – SOLD
13. Misc. interior pieces
14. Tilt column with wheel
15. PS pump – SOLD
16. IFS steering box
17. Alternator – SOLD
18. Starter – SOLD
19. IFS calipers – SOLD
20. IFS rotors
21. NEW parking brake cable
22. Husky floor liners
23. 2” PA body lift with shifters already extended

Please E-mail me if you want anything that is left….

E-MAIL

Thanks.

Greg

4 the Hard Way

This is what is still available:

1. Cab (extra cab)
2. Bed
3. Doors
4. Trans (5 spd.) & T-case (88k)
5. Rims (15” x 10” Eaton 3.5/8” bs)
6. Tires (35” x 12.50” x 15” ProComp MT’s)
7. Gas tank
8. Master cylinder
9. Drive shafts (CV)
10. Dash (Blue)
11. Misc. interior pieces (Blue)
12. Tilt column with wheel
13. IFS steering box
14. IFS rotors
15. NEW parking brake cable
16. Husky floor liners
17. SR5 gauge package
18. Tail lights
19. T-Body
20. MAS
21. Lund Moonvisor for a 84-88 truck (off my 4Runner)

Please E-mail me if you want anything that is left….

E-MAIL

Thanks.

Greg

4 the Hard Way

BUMP

4 the Hard Way

BUMP AGAIN.

4 the Hard Way

BUMP, AGAIN....

NO ONE WANTS 35's EVEN?

GREG

4 the Hard Way

BuMp

okidoc

Are you aprting the engine? If so how much for Driver side valve cover if it doesn't leak.

Sorry about your truck, I would almost feel like I lost a member of the family.

4 the Hard Way

Sorry but I already sold the motor complete.

Greg

castrolSi

Wish you were closer, I need a bed...

~castrol

4 the Hard Way

Here is what's left, not much but:

1. TRANS/T-CASE (3.0 V6)
2. IFS STEERING BOX
3. BED (maybe sold?)
4. CAB (also maybe sold?)
5. IFS ROTORS
5. IFS FRONT CV DRIVESHAFT
6. REAR 2 PIECE DRIVESHAFT
7. GAS TANK
8. TAIL LIGHTS
9. HUSKY LINERS
10. T-BODY
11. 35" PROCOMP MT'S

Send me an e-mail if you are interested: four_the_hard_way@yahoo.com

Thanks.

Greg