3rd gen sliders
 

ok im on the market for rock sliders for my 98 runner and i have read allot of discuson on what leinght people are running. the pinch weld on the rocker is about 68-69" long im not shure.

what lenght are some of you running and how much lift and what size tires? the more info the better befor i make the purchase.

thanks, josh

3 inches of lift with 285's and the stubbs sliders are actually an inch or two too short. Ill measure later.

Have you read these threads? :horse:

Ideal Slider Length:
https://www.yotatech.com/forums/f2/ideal-slider-length-95737/
Slider length:
https://www.yotatech.com/forums/f2/slider-length-95710/

Seems like mine were 69" long or so on my 3rd gen. I offer some that are 68" but you might find some others more well suited for a 3rd gen.

Try www.sonoransteel.com or www.stubbswelding.com as both of those guys won't steer you wrong.

:guitar:

Richard at Stubbswelding will ask you which flares you have and all that when you call him. He will pretty much make them any length you want.

His is by far the most professional guy I have bought custom parts from. You just cannot go wrong with him.

Absolutely. One of the best, most helpful, and patient guys I've ever bought fabrication stuff from... We only corresponded by email, but he was prompt and very professional. And his sliders were PERFECT! shipped quickly and very high-quality materials. Go to his website:

http://stubbswelding.com/

All the info you want is there. :bigok: :bigok:

mine are 64" i didnt want to get too close to chance rubbbing on them.