1st Gen runner - Chevys and BJ spacers Need shock lengths
03-25-2005, 11:11 AM
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: Central, PA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
1st Gen runner - Chevys and BJ spacers Need shock lengths
I have searched several forums and have not found the info specific to a first gen 4runner. I am swapping 63" chevys in the rear and flipping my U-bolts with the rockstomper kit. In the front I will be installing BJ spacers. I want to do it all at one time so I would like to know the shock measurements that others are running. i know this is a fairly common swap so the info is out there I am sure. The rear shocks are going to stay in their stock location just flipped with the u-bolts. I am looking at doesch tech, or possibly rancho or bilstein shocks. I can cross reference the numbers to the other brands. Thanks for all your help and I can't wait until it is done.
03-25-2005, 12:10 PM
#3
Registered User
Join Date: Jun 2003
Location: Davis, CA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
For the chevys this thread on priate4x4 will probably help you. http://www.pirate4x4.com/forum/showt...5&page=1&pp=25
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
