Zytra's 90' Pickup 4x4 3.0
#41
Some more progress on the swap today. We Installed wheel spacers, tires, put load on the spring, finished welding front hanger, installed shocks and welded hoops.
Everything seems to be fitting well so far.
I can't really tell on the picture but in person it kinda of looks like it was slightly leaning on one side. Maybe there is some slight difference in settling time between the 2 springs. Or maybe it was just optical illusion.
oh and we had one of the shackle bushings fail (lip cracked), maybe it wasn't in enough, or not enough grease. I don't know if anyone is even reading this but if you know what I did wrong here that would help!
Everything seems to be fitting well so far.
I can't really tell on the picture but in person it kinda of looks like it was slightly leaning on one side. Maybe there is some slight difference in settling time between the 2 springs. Or maybe it was just optical illusion.
oh and we had one of the shackle bushings fail (lip cracked), maybe it wasn't in enough, or not enough grease. I don't know if anyone is even reading this but if you know what I did wrong here that would help!
The following users liked this post:
old87yota (06-30-2019)
Thread
Thread Starter
Forum
Replies
Last Post